Vacuum Pyrolysis Furnace

DescriptionIt used for vacuum pyrolysis process of Carbon-Ceramic composite , ceramic matrix composite material. It has both horizontal and vertical structures.Application: carbon-ceramic composite, c...

INQUIRY

Technical Features
Related optional configuration

Description
It used for vacuum pyrolysis process of Carbon-Ceramic composite , ceramic matrix composite material. It has both horizontal and vertical structures.

Application:carbon-ceramic composite, ceramic matrix composite, SiC fiber and etc.

Specifications of Vacuum Pyrolysis Furnace

ModelSpec	Working Zone Size (W × H × L) (mm)	Max. Temperature (°C)	Temperature Uniformity (°C)	Ultimate Vacuum (Pa)	Pressure Increase Rate (Pa/h)
HVP-060609	600 × 600 × 900	1800	±7.5	1-100	0.67
HVP-101015	1000 × 1000 × 1500	1800	±10	1-100	0.67
HVP-121225	1200×1200×2500	1800	±10	1-100	0.67
HVP-161633	1600×1600×3300	1800	±15	1-100	0.67
HVP-201840	2000×1800×4000	1800	±15	1-100	0.67

VVP-0608	φ600×800	1800	±5	1-100	0.67
VVP-1015	Φ1000×1500	1800	±10	1-100	0.67
VVP-1120	φ1100×2000	1800	±10	1-100	0.67
VVP-1520	φ1500×2000	1800	±15	1-100	0.67
VVP-2230	Φ2200×3000	1800	±15	1-100	0.67
The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements.

Technical Features

1.Using electric resistant heating, with temperature compensation or multiple temperature zone control, with great temperature uniformity;

2.Using unique ACME super high temperature and high current power supply technology, it can long time stable use at high temperature;

3.Installed with special sealing muffle to minimize the exhaust gas contamination to the heating element and insulation material;

4.Using special exhaust gas treatment device, which is environment-friendly and convenient to clean.

Optional Configuration of Vacuum Pyrolysis Furnace

1.Furnace door: screw elevation type/hydraulic elevation type; retate opening/ parallel opening(large size furnace door); manual tight/ auto lock-ring tight

2.Furnace vessel: all carbon steel/inner layer stainless steel/all stainless steel

3.Furnace hot zone: soft carbon felt/soft graphite felt/hard composite felt/ CFC

4.Heating element and muffle: isostatic press graphite/press high purity, high strength and high density graphite/fine size graphite

5.Thermocouple: K type/N type/C type/S typess