Induction Heating Furnace

Furnace can be used for deposition, carbonization, siliconization, graphitization, sintering and other treatment. It can meet the temperature requirement upto 3000℃.

INQUIRY

Technical Features
Related optional configuration

Description
Furnace can be used for deposition, carbonization, siliconization, graphitization, sintering and other treatment. It can meet the temperature requirement upto 3000℃.

Application:C/C composite material, graphite, carbon fiber insulation materials, graphene and etc.

Specifications of Induction Heating Furnace

ModelSpec	Working Zone Size (W×H×L) (mm)	Max. Temperature (°C)	Temperature Uniformity (°C)	Ultimate Vacuum (Pa)	Pressure Increase Rate (Pa/h)
VIG-0305	φ300×500	3000	±10	1-100	0.67
VIG-0608	φ600×800	3000	±10	1-100	0.67
VIG-0812	φ800×1200	3000	±15	1-100	0.67
VIG-1015	φ1000×1500	3000	±15	1-100	0.67
VIG-1120	φ1100×2000	3000	±15	1-100	0.67
VIG-1520	φ1500×2000	3000	±25	1-100	0.67
The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements.

Technical Features

1.Using medium frequency induction heating, the max. Temperature can reach up to 3000℃;

2.Using special designed high temperature pyro-meter measuring technology with precision temperature control and small deviation;

3.External circulation forced cooling system as an option, short batch cycle and with high efficiency;

4.Configured with high efficiency harmonic wave filter to minimize the side effect to the electric grid.

Optional Configuration of Induction Heating Furnace

1.Furnace door: screw/hydraulic/manual elevation; manual tight/ auto lock-ring tight

2.Furnace vessel: all carbon steel/inner layer stainless steel/all stainless steel

3.Furnace hot zone: soft carbon felt/soft graphite felt/rigid composite board/CFC

4.Heating element and muffle: isostatic press graphite/high purity, strength and density graphite/fine size graphite

5.Process gas system: volume/mass flow-meter;

6.Thermocouple: K type/ N type/ C type/ S type

7.Pyro-meter: single color/ Dual-color; CHINO/ Raytek