classification
Contact Us
[email protected]|[email protected]
ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan
Continuous PRE-oxidation Furnace
Furnace is used for continuous pre-oxidation treatment under controlled atmosphere of PAN based, asphalt based, viscose based carbon fiber and its felt material.
- Technical Features
- Related optional configuration
Description
Furnace is used for continuous pre-oxidation treatment under controlled atmosphere of PAN based, asphalt based, viscose based carbon fiber and its felt material.
Technical Features
1.Using special hot air circulation and air distribution structure, the temperature uniformity is ≤±1.5℃/m, air flow uniformity is ≤±20%;
2.Using module section manufacture technology, it can connect together freely in accordance with the production capacity;
3.It can be designed multi-layer structure to reduce the floor space requires;
4.Using auto material feeding and rolling discharge device, operate easily.
Optional Configuration of Continuous Pre-oxidation Furnace
1.Furnace structure: single layer/multi-layer
2.Hot air circulation type: top and bottom/left and right/inlet from the rear end top, return from the entrance end side
3.Hot air distribution: concentration heating, evenly distribution/separate heating, evenly distribution
4.HMI: simulation screen/touch screen/industrial compute
5.PLC: OMRON/Siemens
6.Temperature controller: SHIMADEN/ Eurotherm
7.Temperature measuring: thermocouple/ thermo-meter
Specifications of Pusher Type Purification Furnace
ModelSpec | LOF-220 | LOF-1100 | LOF-1600 |
Belt Width | 200 | 1100 | 1600 |
Furnace Hearth Width | 220 | 1300 | 1800 |
Pre-oxidation Temperature(℃) | 150-300 | 150-300 | 150-300 |
Section Temperature uniformity(℃) | Cross-section:±2℃ | ||
Pre-oxidation Atmosphere | Air | ||
Gas Speed | 0.5-3 Nm/s(Adjustable) | ||
The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements. |