Vacuum Pressure Infiltration/ Melting Infiltration Furnace

This type of furnace is mainly used for pressure infiltration of composite material, It has two types: Low temperature infiltration and high temperature melting infiltration.

INQUIRY

Technical Features
Related optional configuration

Description
This type of furnace is mainly used for pressure infiltration of composite material, It has two types: Low temperature infiltration and high temperature melting infiltration.

Application:

The low temperature infiltration is mainly used for infiltration asphalt, resin and polycarbosilane of C/C, SiC composite material.

The high temperature melting infiltration is mainly used for infiltration aluminum alloy, copper alloy, titanium alloy and high temperature alloy of C/C, graphite, ceramic composite material.

Specifications of Vacuum Pressure Infiltration/Melting Infiltration Furnace

ModelSpec	Working Zone Size (W × H × L) (mm)	Max. Temperature (°C)	Temperature Uniformity (°C)	Ultimate Vacuum (Pa)	Pressure Increase Rate (Pa/h)
VPI-0305	φ300×500	400	±5	1-100	0.67
VPI-0608	φ600×800	400	±7.5	1-100	0.67
VPI-1015	φ1000×1500	400	±10	1-100	0.67
VPI-1120	φ1100×2000	400	±15	1-100	0.67
VPI-1216	φ1200×1600	400	±15	1-100	0.67
VPI-1320	φ1300×2000	400	±15	1-100	0.67
VPI-1520	φ1500×2000	400	±15	1-100	0.67
VPI-2525	φ2500×2500	400	±20	1-100	0.67
The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements.

Technical Features

1.Furnace has multiple level safety protection;

2.Locking ring is hydraulic driving with mechanical limit;

3.Door open is hydraulic manual open or auto open, simplify operation;

4.Low temperature infiltration furnace has single chamber and twin chamber option;

5.High temperature melting infiltration furnace can continuous working to improve the production efficiency.

Optional Configuration of Vacuum Pressure Infiltration/Melting Infiltration Furnace

1.Heating element : Ni-Cr ; Fe-Cr-Al-Nb ; SiC; Graphite ; CFC

2.Process gas system : High pressure valve ; manual/auto valve; foreign brand/Chinese brand

3.Vacuum pump and gauge : foreign brand/Chinese brand

4.HMI : simulation screen/touch screen

5.PLC : OMRON/Siemens

6.Temperature controller : SHIMADEN/Eurotherm

7.Thermocouple : K type/ N type/ C type/ S type