classification
- Heat Treatment & Brazing Thermal Equipment
- Carbon & Ceramic Thermal Equipment
- Powder Metallurgy Thermal Processing Equipment
- Organic Solid Waste Thermal Pyrolysis Equipment
- High purity carbon material and Coated graphite component
- Atomization Powder Manufacturing Equipment
- 3D Print New Material & Parts
Contact Us
+86-151 7315 3690( Jessie Mobile)
ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan
Mesh Belt Sinter Furnace
This equipment is primarily used for the high-temperature sintering of iron-copper based powder metallurgy parts, such as the sintering treatment of oil-impregnated bearings, gears, clutch plates, bushings, and liners; it can also be employed for continuous carburizing, quenching, hardening, and tempering heat treatment of hardware components, as well as for annealing and reduction processing of metal powders.
- Technical Features
- Related optional configuration
Description
This equipment is primarily used for the high-temperature sintering of iron-copper based powder metallurgy parts, such as the sintering treatment of oil-impregnated bearings, gears, clutch plates, bushings, and liners; it can also be employed for continuous carburizing, quenching, hardening, and tempering heat treatment of hardware components, as well as for annealing and reduction processing of metal powders.
Specifications of Mesh Belt Sinter Furnace
| Spec/Model | MBSF-300/100-7 | MBSF-460/100-7 | MBSF-610/125-7 |
| Belt (mm) | 300 | 460 | 610 |
| Muffle (mm) | 90 | 100 | 125 |
| Heating zone | 7 | 7 | 7 |
| Heating zone length (mm) | 4000+5200 | 4500+5600 | 4600+6000 |
| Max.temperature (°C) | 1150 | 1150 | 1150 |
| Temperature Uniformity (°C) | ±5 | ±5 | ±5 |
| Heating Power (kW) | 120 | 250 | 320 |
| Process gas of mesh belt sintering furnace | N2/3H2+N2/H2/CH4 | N2/3H2+N2/H2/CH4 | N2/3H2+N2/H2/CH4 |
| Gas consumption (m³/h) | 15 | 20 | 30 |
| Total size L×W×H (mm) | 21000 × 1500 × 1800 | 23500 × 1700 × 1900 | 23500 × 1900 × 2000 |
| The above specifications are defined according to ferrous part sinter. The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements. | |||
Technical Features
1. Modular heating elements facilitate easy maintenance and replacement without requiring furnace shutdown.
2.Full-fiber furnace lining insulation structure ensures fast heating rates and low energy consumption.
3.Hinged/suspended furnace cover design allows easy access for muffle maintenance and replacement.
4. Equipped with remote control capabilities for operation, fault diagnosis, and software upgrades.
Optional Configuration of Mesh Belt Sinter Furnace
1. Refractory material: silicate aluminum fiber/ceramic fiber felt
2. Heater material: 0Cr21Al6Nb, 0Cr27Al7Mo2
3. Muffle material: SiC+SiN/heat resistant steel
4. Mesh belt material: SUS310S, SUS314, SUS304
5. Process gas control: Volume/mass flow-meter, manual value/auto value, Foreign brand/Chinese brand
6. Operation panel: simulation screen/touch screen/industrial computer
7. PLC: OMRON/Siemens
8. Temperature controller: SHIMADEN/EUROTHERM
9. Thermocouple: C type/K type/N type (tungsten sheath/Moly sheath/ceramic sheath)
10. Recorder: Paperless recorder/paper recorder, Foreign brand/Chinese brand
11. Electric components: CHINT/Schneider/Siemens
