classification
Contact Us
+86-151 7315 3690( Jessie Mobile)
ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan
Vacuum Sintering Furnace(AlN/ALON)
Primarily used for vacuum sintering and atmosphere sintering of aluminum nitride/aluminum oxide ceramic products; also compatible with the preparation of aluminum nitride/aluminum oxide powders.
- Technical Features
- Related optional configuration
Description
Primarily used for vacuum sintering and atmosphere sintering of aluminum nitride/aluminum oxide ceramic products; also compatible with the preparation of aluminum nitride/aluminum oxide powders.
Application:
Substrates, guide rails and work tables, robotic arms, electrostatic chucks, transparent ceramics, high-thermal-conductivity substrates, heaters, structural components, ceramic powder materials, etc.
Specifications of Vacuum Sintering Furnace
Specifications/Model | HSN-040418 | HSN-050515 | HSN-060612 | HSN-060618 |
Working Zone Size (W×H×L) (mm) | 500×500×1100 | 500×500×1500 | 600×600×1200 | 600×600×1800 |
| Max. Temperature (°C) | 1500-2000 | 1500-2000 | 1500-2000 | 1500-2000 |
| Temperature Uniformity (°C) | ±5~±10 | ±5~±10 | ±5~±10 | ±5~±10 |
| Ultimate Vacuum (Pa) | 10-4-100 | 10-4-100 | 10-4-100 | 10-4-100 |
| Pressure Increase Rate (Pa/h) | 0.67 | 0.67 | 0.67 | 0.67 |
| The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements. | ||||
Technical Features
Technical Features of the Vacuum Sintering Furnace (AIN/AION):
1.Features a special furnace chamber structure and heater arrangement, ensuring excellent temperature uniformity;
2.Fully sealed muffle ensures excellent sealing performance and strong resistance to contamination;
3.Capable of vacuum sintering, negative pressure degreasing sintering, and carrier gas degreasing sintering;
4.Optional degreasing system available to enable one-step degreasing and sintering of ceramic products;
5.Suitable process atmospheres: N₂/Ar/H₂.
Optional Configuration of Vacuum Sintering Furnace
1.Furnace door: screw/hydraulic/manual elevation; manual tight/auto lock-ring tight
2.Furnace vessel: all carbon steel/inner layer stainless steel/all stainless steel
3.Furnace hot zone: soft carbon felt/soft graphite felt/rigid composite board/CFC
4.Heating element and muffle: isostatic press graphite/high purity, strength and density graphite/fine size graphite
5.Process gas system: volume/mass flow-meter; manual/auto valve;
6.Thermocouple: C type/S type/R type/B type
7.Pyro-meter:Dual-color/Single color; CHINO/Raytek
