ukuhlukaniswa
- Isisetshenziswa Sokwelapha Ukushisa Kwevacuum
- I-Powder Metallurgy Industrial Heating Equipment
- I-C&SiC Composites Industrial Heating Equipment
- Izinsiza Zokukhiqiza Impuphu ye-Atomization
- Izinto ezintsha
- I-Organic Solid Waste Thermal Pyrolysis Equipment
- I-carbon material ehlanzekile ne-Coated graphite ingxenye
Xhumana nathi
+86-151 7315 3690( Jessie Mobile)
phesheya kwezilwandle@sinoacme.cn
I-ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan
Vacuum Hot Press Furnace
Isithando somlilo esishisayo se-vacuum sisetshenziswa kabanzi kuzo zonke izinhlobo zezinto eziyinhlanganisela, izinto ezishisayo ezishisa kakhulu, i-SiC/Si3N4/B4C izinto zobumba ze-ceramic, izinto zamandla ensimbi yesisekelo sethusi, izinto eziyisisekelo zensimbi, ukubunjwa kwezinto zamandla ensimbi-yethusi, ukuminyana.
- Izici Zobuchwepheshe
- Ukucushwa kokuzithandela okuhlobene
Isicelo
Umshini hot press furnace is widely used for all kinds of composite materials, high conduct thermal material, SiC/Si3N4/B4C ceramic materials, copper base iron power materials, iron base materials, iron-copper base power materials shaping, densification. And the max sintering temperature can be 2500°C, such as the iron-copper base brake disc of the plane, bullet train brake-shoe, armor, armored car backplane, bullet against armor of the helicopter
Imininingwane Eyinhloko
| Ipharamitha/Imodeli | I-VHP-444 | I-VHP-445 | I-VHP-446 | I-VHP-554 | I-VHP-555 |
| Usayizi wendawo eshisayo esebenzayo W×H×L (mm) | 400 × 400 × 400 | 500 × 500 × 600 | 400 × 400 × 600 | 500 × 500 × 400 | 500 × 500 × 500 |
| Amandla Okushisa (kW) | Nquma inani lamandla ngokusekelwe ekushiseni okuphezulu kwezinto zokusebenza ezi-odiwe | ||||
| Ubukhulu. izinga lokushisa (°C) | 2000 / 2400 / 2600 | ||||
| Ukucindezela kokulayisha (T) | 30-200 | 30-200 | 30-200 | 30-300 | 30-300 |
| I-Temperature Uniformity (°C) | ± 5 | ± 5 | ± 5 | ± 5 | ± 5 |
| I-vacuum degree (Pa) | 5/4 × 10-3/6×10-4 | 5/4 × 10-3/6×10-4 | 5/4 × 10-3/6×10-4 | 5/4 × 10-3/6×10-4 | 5/4 × 10-3/6×10-4 |
| Izinga Lokwenyusa Ingcindezi (Pa/h) | ≤0.26 | ≤0.26 | ≤0.26 | ≤0.26 | ≤0.26 |
| ≤0.65 | ≤0.65 | ≤0.65 | ≤0.65 | ≤0.65 | |
| Ipuleti lokucindezela inani | Abangashadile/Abaningi | Abangashadile/Abaningi | Abangashadile/Abaningi | Abangashadile/Abaningi | Abangashadile/Abaningi |
| Ukufana kwepuleti eliphezulu neliphansi (mm) | ≤0.08 | ≤0.08 | ≤0.08 | ≤0.08 | ≤0.08 |
| Ukunemba kwengcindezi | ≤ ± 0.5% | ≤ ± 0.5% | ≤ ± 0.5% | ≤ ± 0.5% | ≤ ± 0.5% |
| ububanzi obugcwele ± 0.5T | ububanzi obugcwele ± 0.5T | ububanzi obugcwele ± 0.5T | ububanzi obugcwele ± 0.5T | ububanzi obugcwele ± 0.5T | |
| Ukunemba kokususwa (mm) | H ± 0.05 | H ± 0.05 | H ± 0.05 | H ± 0.05 | H ± 0.05 |
| Ingcindezi yokupholisa igesi (ibha) | 2-10 | 2-10 | 2-10 | 2-10 | 2-10 |
| Ipharamitha/Imodeli | I-VHP-556 | I-VHP-666 (A/B) | I-VHP-777 | I-VHP-888 | I-VHP-9910 |
| Usayizi wendawo eshisayo esebenzayo W×H×L (mm) | 500 × 500 × 600 | 600 × 600 × 600 | 700 × 700 × 700 | 800 × 800 × 800 | 900 × 900 × 1000 |
| Amandla Okushisa (kW) | Nquma inani lamandla ngokusekelwe ekushiseni okuphezulu kwezinto zokusebenza ezi-odiwe | ||||
| Ubukhulu. izinga lokushisa (°C) | 2000 / 2400 / 2600 | ||||
| Ukucindezela kokulayisha (T) | 30-300 | 50-400 | 50-500 | 100-700 | 200-800 |
| I-Temperature Uniformity (°C) | ± 5 | ± 5 | ± 5 | ± 5 | ± 5 |
| I-vacuum degree (Pa) | 5/4 × 10-3/6×10-4 | 5/4 × 10-3/6×10-4 | 5/4 × 10-3/6×10-4 | 5/4 × 10-3/6×10-4 | 5/4 × 10-3/6×10-4 |
| Izinga Lokwenyusa Ingcindezi (Pa/h) | ≤0.26 | ≤0.26 | ≤0.26 | ≤0.26 | ≤0.26 |
| ≤0.65 | ≤0.65 | ≤0.65 | ≤0.65 | ≤0.65 | |
| Ipuleti lokucindezela inani | Abangashadile/Abaningi | Abangashadile/Abaningi | Abangashadile/Abaningi | Abangashadile/Abaningi | Abangashadile/Abaningi |
| Ukufana kwepuleti eliphezulu neliphansi (mm) | ≤0.08 | ≤0.08 | ≤0.08 | ≤0.08 | ≤0.08 |
| Ukunemba kwengcindezi | ≤ ± 0.5% | ≤ ± 0.5% | ≤ ± 0.5% | ≤ ± 0.5% | ≤ ± 0.5% |
| ububanzi obugcwele ± 0.5T | ububanzi obugcwele ± 0.5T | ububanzi obugcwele ± 0.5T | ububanzi obugcwele ± 0.5T | ububanzi obugcwele ± 0.5T | |
| Ukunemba kokususwa (mm) | H ± 0.05 | H ± 0.05 | H ± 0.05 | H ± 0.05 | H ± 0.05 |
| Ingcindezi yokupholisa igesi (ibha) | 2-10 | 2-10 | 2-10 | 2-10 | 2-10 |
| Ipharamitha/Imodeli | I-VHP-101010 | I-VHP-121206 | I-VHP-131314 | I-VHP-141412 |
| Usayizi wendawo eshisayo esebenzayo W×H×L (mm) | 1000 × 1000 × 1000 | 1200 × 1200 × 600 | 1300 × 1300 × 1400 | 1400 × 1400 × 1200 |
| Amandla Okushisa (kW) | Nquma inani lamandla ngokusekelwe ekushiseni okuphezulu kwezinto zokusebenza ezi-odiwe | |||
| Ubukhulu. izinga lokushisa (°C) | 2000 / 2400 / 2600 | |||
| Ukucindezela kokulayisha (T) | 200-1000 | 300-1500 | 300-2000 | 300-2000 |
| I-Temperature Uniformity (°C) | ± 5 | ± 5 | ± 5 | ± 5 |
| I-vacuum degree (Pa) | 5/4 × 10-3/6×10-4 | 5/4 × 10-3/6×10-4 | 5/4 × 10-3/6×10-4 | 5/4 × 10-3/6×10-4 |
| Izinga Lokwenyusa Ingcindezi (Pa/h) | ≤0.26 | ≤0.26 | ≤0.26 | ≤0.26 |
| ≤0.65 | ≤0.65 | ≤0.65 | ≤0.65 | |
| Ipuleti lokucindezela inani | Abangashadile/Abaningi | Abangashadile/Abaningi | Abangashadile/Abaningi | Abangashadile/Abaningi |
| Ukufana kwepuleti eliphezulu neliphansi (mm) | ≤0.08 | ≤0.08 | ≤0.08 | ≤0.08 |
| Ukunemba kwengcindezi | ≤ ± 0.5% | ≤ ± 0.5% | ≤ ± 0.5% | ≤ ± 0.5% |
| ububanzi obugcwele ± 0.5T | ububanzi obugcwele ± 0.5T | ububanzi obugcwele ± 0.5T | ububanzi obugcwele ± 0.5T | |
| Ukunemba kokususwa (mm) | H ± 0.05 | H ± 0.05 | H ± 0.05 | H ± 0.05 |
| Ingcindezi yokupholisa igesi (ibha) | 2-10 | 2-10 | 2-10 | 2-10 |
Izici Zobuchwepheshe
1. Lindela inqubo yokulayisha nokulayisha ngesandla, abanye baphethwe yisifuba somoya, ngokwedijithali futhi bahlakaniphile.
2.Ngesistimu yegesi yamabha ama-2 ibha-15 yokupholisa ngokushesha kwendingilizi yangaphandle, qinisekisa ukuthi umkhiqizo uphola ngokushesha nangempumelelo.
3.Hhayi kuphela ukusebenza ngaphansi kwe-vacuum, futhi ingasebenza ngaphansi kwe-hydrogen enhle ne-argon atmosphere. Kuhle ukucindezela amandla afanayo njenge-CuZnSn.
4.Indawo eshisayo mayifaniswe ngokubalwa ngokufana okunembayo kwezinga lokushisa, izinto zokushisisa kanye nokwahlukanisa kube ukuguquguquka kwesakhiwo.
5.Kukhona uhlaka olucindezelayo olunesilinda esine-hydraulic esisodwa noma ngaphezulu kukho kokubili phezulu nangaphansi ukuze ucindezele kabili.
6.Ubuso benqama bokunemba bungaba ±5um.
7.Zihlomise ngengcindezi kanye nenzwa yesisindo eyenziwe eJalimane ukuze wenze isiqiniseko sokuthi amandla okucindezelayo anemba ngokunemba.
8.Zihlomise ngenzwa yendawo eyenziwe-eJalimane ukuze wenze isiqiniseko sokunemba kwendawo.
9.Inqama ingahlala amahora angu-12 ku-2400°C ngamandla okucindezela anembile.
10.Ivelu yamandla okucindezelayo, inani lokususa lizogoba futhi kuboniswe idijithali esikrinini sekhompyutha.
11.Ingcindezi yendlela eyodwa kanye nenqama yokucindezela okukabili.
12.Izindlela zokulawula ukucindezela: nge-hydraulic servo-motor proportional valve flow control.
I-13.I-Insulation ingaba i-graphite noma insimbi.
14.Ingcindezi yokulayisha ingaba ngu-30T, 50T, 100T, 200T, 400T, 500T, 800T, 1000T, 2000T.
15.Izinga lokushisa lingaba ngu-1500°C, 1800°C, 2000°C, 2300°C, 2400°C, 2500°C.
16.Impahla yenqama ingaba yi-isostatic pressing graphite noma i-TZM alloy.
