ukuhlukaniswa
Xhumana nathi
+86-151 7315 3690( Jessie Mobile)
phesheya kwezilwandle@sinoacme.cn
I-ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan
Vacuum Debinding and Sintering Furnace
Vacuum debinding and sinter furnace is mainly suitable for debinding and sinter process of tungsten alloy, heavy alloy, moly alloy, titanium alloy and cemented carbide materials. The vacuum debinding sitering furnace is used for PEG, paraffin and rubber binder removing. It can also do vacuum sinter, partial pressure sinter and minor pressure sinter processes.
- Izici Zobuchwepheshe
- Ukucushwa kokuzithandela okuhlobene
Incazelo
Vacuum debinding and sinter furnace is mainly suitable for debinding and sinter process of tungsten alloy, heavy alloy, moly alloy, titanium alloy and cemented carbide materials. The vacuum debinding sitering furnace is used for PEG, paraffin and rubber binder removing. It can also do vacuum sinter, partial pressure sinter and minor pressure sinter processes.
Specifications of Vacuum Debinding and Sinter Furnace
I-SpecModel | VDSF-030306 | VDSF-040408 | VDSF-040415 | VDSF-050520 |
Working Zone Size W×H×L (mm) | 300 × 300 × 600 | 400 × 400 × 800 | 400 × 400 × 1500 | 500 × 500 × 2000 |
Max.Weight(kg) (not mean actual load weight) | 100 | 200 | 400 | 900 |
Izinga lokushisa eliphezulu (°C) | 1550 | 1550 | 1550 | 1550 |
I-Temperature Uniformity (°C) | ± 4 | ± 4 | ± 5 | ± 5 |
Amandla Okushisa (kW) | 75 | 90 | 120 | 220 |
I-Ultimate Vacuum (Pa) | 1 | 1 | 1 | 1 |
Izinga Lokunyuswa Kwengcindezi (Pa/h) | ≤0.67 | ≤0.67 | ≤0.67 | ≤0.67 |
Debinding gas | I-Ar/N2/H2 | I-Ar/N2/H2 | I-Ar/N2/H2 | I-Ar/N2/H2 |
Amapharamitha angenhla angalungiswa ahambisane nezidingo zenqubo, awekho njengezinga lokwamukelwa, imininingwane yemininingwane. izoshiwo esiphakamisweni sezobuchwepheshe kanye nezivumelwano. |
Izici Zobuchwepheshe
1. I-muffle edizayinelwe ngokukhethekile iyamukelwa ngokuvaleka kahle futhi ibophe ngokugcwele ekhiphekayo, ivimbele ukungcola kwezingxenye zangaphakathi.
2. It has functions of slow vacuum, vacuum pre-sinter, minor negative pressure debinding, TOWAC debinding and minor positive pressure debinding.
3. The furnace adopts advanced refractory structure and materials, which features good insulation performance and less heat absorption. It can save more than 20% energy compare o previous design.
4. Vacuum debinding and sinter furnace works by using touch screen operation and PLC central control, which makes the operation simple and reliable.
5. The vacuum debinding sitering furnace uses special hot zone structure and heating element design, assuring good temperature uniformity.
6.The furnace has the functions of over temperature and over pressure fault alarm, mechanical automatic pressure protection and interlocking, which forms a highly safe furnace.
7. Inokusebenza kokulawula kude, ukuxilongwa kokungasebenzi kahle okukude kanye nemisebenzi yokuvuselela uhlelo olukude.
Optional Configuration of Vacuum Debinding and Sinter Furnace
1. Furnace door: hinge turning type, manual tight/auto lock-ring tight
2. Umkhumbi wesithando somlilo: Yonke i-carbon steel/ungqimba lwangaphakathi lwensimbi engagqwali/Ingqikithi yensimbi engagqwali
3. Furnace hot zone: Soft carbon felt+Hard composite felt/all hard composite felt
4. Heater material: isostatic press graphite
5. 5.Muffle material: fine size graphite/ isostatic press graphite
6. Ukulawulwa kwegesi okucutshungulwayo: Ivolumu/imitha yokugeleza kwenqwaba, inani lemanuwali/inani elizenzakalelayo, uhlobo lwangaphandle/umkhiqizo waseShayina
7. Iphampu ye-vacuum negeji: Umkhiqizo wangaphandle/umkhiqizo waseShayina
8. Iloli yokulayisha: uhlobo lwe-roller / uhlobo lwemfoloko
9. Iphaneli yokusebenza: isikrini sokulingisa/isikrini sokuthinta/ikhompyutha yezimboni
10. PLC: OMRON/Siemens
11. Isilawuli sezinga lokushisa: SHIMADEN/EUROTHERM
12. I-Thermocouple: Uhlobo C (i-tungsten sheath/i-Moly sheath/i-ceramic sheath)
13. Irekhoda: Isirekhoda esingenaphepha/isiqophi sephepha, uhlobo lwangaphandle/umkhiqizo wamaShayina
14. Izingxenye zikagesi: CHINT/Schneider/Siemens