ukuhlukaniswa
Xhumana nathi
+86-151 7315 3690( Jessie Mobile)
phesheya kwezilwandle@sinoacme.cn
I-ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan
I-Mesh Belt Sinter Furnace
Mesh belt sinter furnace is mainly used for high temperature sinter of powder metallurgy ferrous and copper parts, such as oil bearing, gear, clutch plate, bushing, sleeve, etc.
- Izici Zobuchwepheshe
- Ukucushwa kokuzithandela okuhlobene
Incazelo
Mesh belt sinter furnace is mainly used for high temperature sinter of powder metallurgy ferrous and copper parts, such as oil bearing, gear, clutch plate, bushing, sleeve, etc.
Specifications of Mesh Belt Sinter Furnace
| I-SpecModel | MBSF-300/100-7 | MBSF-460/100-7 | MBSF-610/125-7 |
| Belt (mm) | 300 | 460 | 610 |
| I-muffle (mm) | 90 | 100 | 125 |
| Ukushisa indawo | 7 | 7 | 7 |
| Ubude bendawo yokushisisa (mm) | 4000 + 5200 | 4500 + 5600 | 4600 + 6000 |
| Izinga lokushisa eliphezulu (°C) | 1150 | 1150 | 1150 |
| I-Temperature Uniformity (°C) | ± 5 | ± 5 | ± 5 |
| Amandla Okushisa (kW) | 120 | 250 | 320 |
| Process gas of mesh belt sintering furnace | N2/ 3H2+N2/H2/ CH4 | N2/ 3H2+N2/H2/ CH4 | N2/ 3H2+N2/H2/ CH4 |
| Gas consumption (m³/h) | 15 | 20 | 30 |
| Usayizi ophelele L×W×H (mm) | 21000 × 1500 × 1800 | 23500 × 1700 × 1900 | 23500 × 1900 × 2000 |
| The above specifications are defined according to ferrous part sinter. The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements. | |||
Izici Zobuchwepheshe
1. The furnace is configured with RBO rapid binder removal system as required.
2. Module type heating element is used , which is convenient for maintenance and replacement without stop the furnace.
2. All fiber refractory structure guarantees faster heating rate and less energy consumption.
3. Mesh belt sintering furnace uses hanging roof structure, which is convenient for maintenance and replacement of muffle.
4. Fast cooling system is available that is mainly for hardening the ferrous material.
5. Inemisebenzi yokusebenza kwesilawuli kude, ukuxilongwa kokungasebenzi kahle okukude kanye nemisebenzi yokuvuselela uhlelo olukude.
Optional Configuration of Mesh Belt Sinter Furnace
1. Refractory material: silicate aluminum fiber/ceramic fiber felt
2. Izinto zokufudumeza: 0Cr21Al6Nb, 0Cr27Al7Mo2
3. Muffle material: SiC+SiN/heat resistant steel
4. Mesh belt material: SUS310S, SUS314, SUS304
5. Ukulawulwa kwegesi okucutshungulwayo: Ivolumu/imitha yokugeleza kwenqwaba, inani lemanuwali/inani elizenzakalelayo, uhlobo lwangaphandle/umkhiqizo waseShayina
6. Iphaneli yokusebenza: isikrini sokulingisa/isikrini sokuthinta/ikhompyutha yezimboni
7. PLC: OMRON/Siemens
8. Isilawuli sezinga lokushisa: SHIMADEN/EUROTHERM
9. Thermocouple: C type/K type/N type (tungsten sheath/Moly sheath/ceramic sheath)
10. Irekhoda: Isirekhoda esingenaphepha/isiqophi sephepha, uhlobo lwangaphandle/umkhiqizo wamaShayina
11. Izingxenye zikagesi: CHINT/Schneider/Siemens
