MENU

Ikhaya>Imikhiqizo>I-C&SiC Composites Industrial Heating Equipment

Xhumana nathi

+86-151 7315 3690( Jessie Mobile)

phesheya kwezilwandle@sinoacme.cn

I-ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan

Vacuum Debinding and Sintering Furnace(SiC/Si3N4/AlN)

Vacuum Debinding and Sintering Furnace(SiC/Si3N4/AlN)

The furnace is used forreaction sintering, low pressure sintering, re-crystal sintering of carbide, nitride, oxide ceramic embryo and products. The degreasing system is optional to realize the one-time degreasing and sintering treatment of ceramic products.

INQUIRY
  • Izici Zobuchwepheshe
  • Ukucushwa kokuzithandela okuhlobene

Incazelo
The furnace is used for  reaction sintering, low pressure sintering, re-crystal sintering of carbide, nitride, oxide ceramic embryo and products. The degreasing system is optional to realize the one-time degreasing and sintering treatment of ceramic products.

Application: Ceramic products such as SiC, silicon nitride and aluminum nitride.

Specifications of Vacuum Debinding and Sintering Furnace

ModelSpec

Working Zone Size

(W×H×L) (mm)

Max. Temperature (°C)Temperature Uniformity (°C)Ultimate Vacuum (Pa)Pressure Increase Rate (Pa/h)
VDSF-050511500 × 500 × 11001500/2400±5/± 101-1000.67
VDSF-1006121000 × 600 × 12001500/2400±5/± 101-1000.67
VDSF-1008131000 × 800 × 13001500/2400±5/± 101-1000.67
VDSF-1008251000 × 800 × 25001500/2400±5/± 101-1000.67
VDSF-1008401000 × 800 × 40001500/2400±5/± 101-1000.67
The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements.


Izici Zobuchwepheshe

1.Using unique ACME super high temperature and high current power supply technology, it can long term stable use at high temperature;

2.Using special designed high temperature pyro-meter measuring technology with precision temperature control and small deviation;

3.Installed with special sealing muffle to minimize the silicon vapor and exhaust gas contamination to the heating element and insulation;

4.Installed high efficiency exhaust gas treatment device , which is environment-friendly and convenient to clean;

5.It has debinding system, to complete debinding and sintering process in one furnace at one time.

Optional Configuration of Vacuum Sintering Furnace

1.Furnace door: screw/hydraulic/manual elevation; manual tight/auto lock-ring tight

2.Furnace vessel: all carbon steel/inner layer stainless steel/all stainless steel

3.Furnace hot zone: soft carbon felt/soft graphite felt/rigid composite board/CFC

4.Heating element and muffle: isostatic press graphite/high purity, strength and density graphite/fine size graphite

5.Process gas system: volume/mass flow-meter; manual/auto valve;

6.Thermocouple: C type/S type/R type/B type

7.Pyro-meter:Dual-color/Single color; CHINO/Raytek


INQUIRY

Imikhiqizo Related


Indawo
I-ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan
Hambayo
+ 86-151 7315 3690(Jessie Mobile)
E-Mail
phesheya kwezilwandle@sinoacme.cn
WhatsApp
+86 151 1643 6885
Inkampani

Yasungulwa ngo-1999, i-ACME (Advanced Corporation for Materials & Equipments) itholakala eXingsha Industrial Park, enendawo engu-100,000 m2. I-ACME yibhizinisi elisezingeni eliphezulu elikhethekile ekwenzeni imishini yokushisisa embonini yezinto ezintsha namandla.Inqubomgomo yobumfihlo | Imibandela

Xhumana nathi
I-Advanced Corporation Yezinto Nezisetshenziswa| Ibalazwe