I-Sinter Furnace Eqhubekayo

It is used for continous sintering of ceramic products, ceramic powder materials and fibers.

INQUIRY

Incazelo
It is used for continous sintering of ceramic products, ceramic powder materials and fibers.

Isicelo:Ceramic products such as SiC, Si3N4 and AlN.

Specifications of Continuous Sinter Furnace

ImodeliSpec	Usayizi Wendawo Yokusebenza (D × H ) (mm)	Ubukhulu. Izinga lokushisa (°C)	Section Temperature Uniformity (°C)	Igesi yokucubungula
CSF-0202	200 × 200	1700 / 1900 / 2400	± 5/±7.5	Air/N₂/Ar/H₂
CSF-0303	300 × 300	1700 / 1900 / 2400	± 5/± 7.5	Air/N₂/Ar/H₂
CSF-0404	400 × 400	1700 / 1900 / 2400	± 5/± 7.5	Air/N₂/Ar/H₂
Amapharamitha angenhla angalungiswa ahambisane nezidingo zenqubo, awekho njengezinga lokwamukelwa, imininingwane yemininingwane. izoshiwo esiphakamisweni sezobuchwepheshe kanye nezivumelwano.

Izici Zobuchwepheshe

1.To use newly develop high temperature heating technology, with high temperature and long service life;

2.Layisha futhi ukhiphe ngokuqhubekayo, ukusebenza kahle kokuvala nokusetshenziswa kwegesi okuphansi;

3.It can be used for continuous sintering of ceramic part, and continuous sintering of powder material;

4.Automatic load, push, unload and discharge for powder, stable quality and less labor;

5.Furnace hot zone length can be customized design.

Optional Configuration of Continuous Sinter Furnace

1.Insulation material: graphite felt/carbon felt/ceramic fiber felt/graphite brick/ceramic brick

2.Heating element: C/C composite/ graphite/ metal/ SiC

3.Muffle: C/C composite/ graphite/ ceramic/ metal

4.Process gas system: volume flow-meter

5.Thermocouple: C type/S type/K type/N type

6.Pyro-meter：Dual-color/Single color; CHINO/Raytek