קעסיידערדיק PRE אַקסאַדיישאַן ויוון

באַשרייַבונג

Furnace is used for continuous pre-oxidation treatment under controlled atmosphere of PAN based, asphalt based, viscose based carbon fiber and its felt material.

ספּעסאַפאַקיישאַנז פון פּושער טיפּ רייניקונג ויוון

טעכניש פֿעיִקייטן

1.Using special hot air circulation and air distribution structure, the temperature uniformity is ≤±1.5℃/m, air flow uniformity is ≤±20%;

2.Using module section manufacture technology, it can connect together freely in accordance with the production capacity;

3.It can be designed multi-layer structure to reduce the floor space requires;

4.Using auto material feeding and rolling discharge device, operate easily.

Optional Configuration of Continuous Pre-oxidation Furnace

1.Furnace structure: single layer/multi-layer

2.Hot air circulation type: top and bottom/left and right/inlet from the rear end top, return from the entrance end side

3.Hot air distribution: concentration heating, evenly distribution/separate heating, evenly distribution

4.HMI: simulation screen/touch screen/industrial compute

5.פּלק: אָמראָן / סיעמענס

6.Temperature controller:  SHIMADEN/  Eurotherm

7.Temperature measuring: thermocouple/ thermo-meter