גאַז אַטאָמיזאַטיאָן פּודער פּראָדוקציע עקוויפּמענט

1. קורץ הקדמה
The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.

2. Equipment Features

• Can produce most of the metal and alloy powders at low cost.
  

• The metal powder is sub-spherical or irregular;
  

• The metal melt solidifies quickly without segregation;
  

• The particle size distribution of the powder can be controlled through appropriate process adjustment.
  

3. הויפּט טעכניש ספּעסאַפאַקיישאַנז

4. קאַנפיגיעריישאַן סעלעקציע

• Medium Frequency power supply: IGBT；KGPS
  

• HMI: Analog screen; computer touch screen
  

• Control method: Industrial computer， PLC
  

• Other components:  High-quality Chinese brand; Foreign brand
  

• it can also be adjusted according to different technical requirements to do customized design

1. קורץ הקדמה
The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.

2. Equipment Features

• Can produce most of the metal and alloy powders at low cost.
  

• The metal powder is sub-spherical or irregular;
  

• The metal melt solidifies quickly without segregation;
  

• The particle size distribution of the powder can be controlled through appropriate process adjustment.
  

3. Configuration selection

• Medium Frequency power supply: IGBT；KGPS
  

• HMI: Analog screen; computer touch screen
  

• Control method: Industrial computer， PLC
  

• Other components:  High-quality Chinese brand; Foreign brand
  

• it can also be adjusted according to different technical requirements to do customized design