MENU

Uy>Mahsulotlar>C&SiC Composites sanoat isitish uskunalari

Biz bilan bog'lanish

+86-151 7315 3690( Jessie Mobile)

overseas@sinoacme.cn

ACME Xingsha sanoat parki, Sharqiy Liangtang ko'chasi. , Changsha shahri, Hunan

Continuous PRE-oxidation Furnace

Continuous PRE-oxidation Furnace

Furnace is used for continuous pre-oxidation treatment under controlled atmosphere of PAN based, asphalt based, viscose based carbon fiber and its felt material.

MA'LUMOT
  • Texnik xususiyatlari
  • Tegishli ixtiyoriy konfiguratsiya

Tavsif

Furnace is used for continuous pre-oxidation treatment under controlled atmosphere of PAN based, asphalt based, viscose based carbon fiber and its felt material.

Specifications of Pusher Type Purification Furnace

ModelSpec

LOF-220

LOF-420

LOF-1300LOF-1800
Tasma kengligi20040011001600
Furnace Hearth Width22042013001800
Pre-oxidation Temperature(℃)150-300150-300150-300150-300
Section Temperature uniformity(℃)Cross-section:±2℃
Pre-oxidation AtmosphereAir/N2
Gas Speed0.5-3 Nm/s(Adjustable)
The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements.

Texnik xususiyatlari

1.Using special hot air circulation and air distribution structure, the temperature uniformity is ≤±1.5℃/m, air flow uniformity is ≤±20%;

2.Using module section manufacture technology, it can connect together freely in accordance with the production capacity;

3.It can be designed multi-layer structure to reduce the floor space requires;

4.Using auto material feeding and rolling discharge device, operate easily.

 

Optional Configuration of Continuous Pre-oxidation Furnace

1.Furnace structure: single layer/multi-layer

2.Hot air circulation type: top and bottom/left and right/inlet from the rear end top, return from the entrance end side

3.Hot air distribution: concentration heating, evenly distribution/separate heating, evenly distribution

4.HMI: simulation screen/touch screen/industrial compute

5.PLC: OMRON/Siemens

6.Temperature controller:  SHIMADEN/  Eurotherm

7.Temperature measuring: thermocouple/ thermo-meter

MA'LUMOT

Shu Mahsulotlar


Manzil
ACME Xingsha sanoat parki, Sharqiy Liangtang ko'chasi. , Changsha shahri, Hunan
Telefon
+ 86-151 7315 3690(Jessi Mobile)
E-Mail
overseas@sinoacme.cn
Biz bilan bog'lanish
+ 86 151 1643 6885
Biz haqimizda

1999-yilda tashkil etilgan ACME (Advanced Corporation for Materials & Equipments) Xingsha sanoat parkida joylashgan bo'lib, 100,000 2 mXNUMX maydonga ega. ACME - yangi materiallar va energiya uchun sanoat isitish uskunalarini ishlab chiqarishga ixtisoslashgan yuqori texnologiyali korxona.Maxfiylik siyosati | Foydalanish shartlari

Biz bilan bog'lanish
Materiallar va uskunalar uchun ilg'or korporatsiya| Sayt xaritasi