pag-uuri
Makipag-ugnay sa
+86-151 7315 3690( Jessie Mobile)
ACME Xingsha Industrial Park, East Liangtang Rd. , Lungsod ng Changsha, Hunan
Mataas na Vacuum Aluminum Brazing Furnace
High vacuum aluminum brazing furnace is applied for vacuum brazing of materials like heat exchanger, air condition evaporator, condenser, radar grid antenna, wave-guide tube, etc.
- Technical Tampok
- Kaugnay na opsyonal na pagsasaayos
paglalarawan
High vacuum aluminum brazing furnace is applied for vacuum brazing of materials like heat exchanger, air condition evaporator, condenser, radar grid antenna, wave-guide tube, etc
Specification of High Vacuum Aluminum Brazing Furnace
| Parameter / Model | VAB-335S | VAB-446S | VAB-557S | VAB-669S |
| Mabisang laki ng hot zone W×H×L (mm) | 300 300 × × 500 | 400 400 × × 600 | 500 500 × × 700 | 600 600 × × 900 |
| Paglo-load ng kapasidad (kg) | 200 | 200 | 300 | 400 |
| Lakas ng Pag-init (kW) | 45 | 45 | 75 | 90 |
| Max. temperatura (°C) | 700 | 700 | 700 | 700 |
| Pagkakatulad ng Temperatura (°C) | ± 3 | ± 3 | ± 3 | ± 3 |
| Vacuum degree (Pa) | 8×10⁻⁴ | 8×10⁻⁴ | 8×10⁻⁴ | 8×10⁻⁴ |
| Pressure Increasing Rate (Pa/h) | ≤0.26 | ≤0.26 | ≤0.26 | ≤0.26 |
| ≤0.65 | ≤0.65 | ≤0.65 | ≤0.65 |
| Parameter / Model | VAB-7711S | VVAB-8812S | VAB-9915S | VAB-121230S |
| Mabisang laki ng hot zone W×H×L (mm) | 700 700 × × 1100 | 800 800 × × 1200 | 900 900 × × 1500 | 1200 1200 × × 3000 |
| Paglo-load ng kapasidad (kg) | 800 | 1000 | 1200 | 3000 |
| Lakas ng Pag-init (kW) | 180 | 210 | 300 | 660 |
| Max. temperatura (°C) | 700 | 700 | 700 | 700 |
Pagkakapareho ng temperatura (° C) | ± 3 | ± 3 | ± 3 | ± 3 |
| Vacuum degree (Pa) | 8×10⁻⁴ | 8×10⁻⁴ | 8×10⁻⁴ | 8×10⁻⁴ |
Pressure Increasing Rate (Pa/h) | ≤0.26 | ≤0.26 | ≤0.26 | ≤0.26 |
| ≤0.65 | ≤0.65 | ≤0.65 | ≤0.65 |
Technical Tampok
1.The aluminum brazing tube furnace structure is horizontal, single chamber and loading horizontally.
2.The furnace hearth consists of several zones, wide nickle-chromium alloy heater and multiple layer stainless steel heat insulation, which has a good temperature uniformity.
3. Ang inlet ng vacuum system ay naka-configure gamit ang gas condensate steering device at filter collection device, na pumipigil sa welding vapor na polusyon sa vacuum pump.
4.Ang natatanging teknolohiya sa pagkakabukod sa likuran ay nagsisiguro ng mas malaking lugar ng radiation at mas mahusay na pagganap ng pagkakabukod.
Optional Configuration of High Vacuum Aluminum Brazing Furnace
1.Uri ng pinto ng furnace: on-line/off-line, patayo pataas at pababa, umiikot
2. Vacuum pump at gauge: Foreign brand/de-kalidad na Chinese brand
3.PLC: OMRON/Siemens/Mitsubishi
4. Temperature controller: SHIMADEN/EUROTHERM/Honeywell
5. Thermocouple: S type, K type, K type
6.Recorder: Paperless recorder/paper recorder
7.HMI: Simulation screen/Touch screen na may computer sa industriya
8.Electric component: mataas na kalidad na Chinese brand/Schneider/Siemens
