Vacuum Debinding Furnace

Vacuum debinding furnace is mainly used for debinding process of tungsten, heavy alloy, moly alloy and cemented carbide materials. It can remove the binders like PEG, paraffin and rubber. Vacuum debinding tube furnace is also applied in debinding process of extrusion rod and press parts.

INQUIRY

Technical Tampok
Kaugnay na opsyonal na pagsasaayos

paglalarawan
Vacuum debinding furnace is mainly used for debinding process of tungsten, heavy alloy, moly alloy and cemented carbide materials. It can remove the binders like PEG, paraffin and rubber. Vacuum debinding tube furnace is also applied in debinding process of extrusion rod and press parts.

Specifications of Vacuum Debinding Furnace

SpecModel	VD-020203	VD-030306	VD-040412	VD-89150
Laki ng Working Zone (W×H×L)(mm)	200 × 200 × 300	300 × 300 × 600	400 × 400 × 1200	Φ890 × 1500
Max. Timbang (kg) (hindi ibig sabihin ng aktwal na timbang ng pagkarga)	30	150	250	500
Max.temperatura (°C)	950	950	950	950
Pagkakatulad ng Temperatura (°C)	± 3	± 3	± 3	± 5
Lakas ng Pag-init (kW)	30	60	105	180
Ultimate Vacuum (Pa)	1	1	1	1
Rate ng Pagtaas ng Presyon (Pa/h)	0.67	0.67	0.67	0.67
Process gas	Ar/N₂/H₂	Ar/N₂/H₂	Ar/N₂/H₂	Ar/N₂/H₂
Ang mga parameter sa itaas ay maaaring iakma sa mga kinakailangan sa proseso, hindi sila bilang pamantayan sa pagtanggap, ang detalye ng detalye. ilalahad sa panukalang teknikal at mga kasunduan.

Technical Tampok
1. The furnace uses special hot zone structure and heating element design, which features temperature uniformity.
2. Ang espesyal na dinisenyo na debinding muffle ay pinagtibay na may mahusay na sealing at kumpletong bind na naaalis, na pumipigil sa polusyon sa loob ng mga bahagi.
3. Vacuum debinding furnace has functions of slow vacuum, vacuum pre-sinter, minor negative pressure debinding, TOWAC debinding and minor positive pressure debinding.
4. The furnace adopts advanced refractory structure and materials, which features good insulation performance and less heat absorption.
5. It works by using touch screen operation and PLC central control, which makes the operation simple and reliable.
6. Ang furnace ay may mga function ng over temperature at over pressure fault alarm, mechanical automatic pressure protection at interlocking, na bumubuo ng lubos na ligtas na furnace.
7. Vacuum debinding tube furnace has remote control operation, remote malfunction diagnosis and remote program update functions.

Optional Configuration of Vacuum Debinding Furnace
1. Furnace door: Hinge turning type, manual tight/auto lock-ring tight
2. Lalagyan ng hurno: Lahat ng carbon steel/Inner layer stainless steel/Kabuuang hindi kinakalawang na asero
3. Furnace hot zone: ceramic fiber felt+hard composite carbon felt, Soft carbon felt+Hard composite felt
4. Heater material: Ni and Cr alloy/isostatic press graphite
5. Muffle material: Ni and Cr alloy/fine size graphite
6. Pagkontrol sa proseso ng gas: Volume/mass flow-meter, manual value/auto value, Foreign brand/Chinese brand
7. Vacuum pump at gauge: Foreign brand/Chinese brand
8. Load truck: uri ng roller/uri ng tinidor
9. Operation panel: simulation screen/touch screen/industrial computer
10. PLC: OMRON/Siemens
11. Temperature controller: SHIMADEN/EUROTHERM
12. Thermocouple: C type/S type/K type/N type(tungsten sheath/Moly sheath/ceramic sheath)
13. Recorder: Paperless recorder/paper recorder, Foreign brand/Chinese brand
14. Mga de-kuryenteng bahagi: CHINT/Schneider/Siemens