mENU

Tahanan>Mga Produkto>Powder Metallurgy Industrial Heating Equipment

Makipag-ugnay sa

+86-151 7315 3690( Jessie Mobile)

overseas@sinoacme.cn

ACME Xingsha Industrial Park, East Liangtang Rd. , Lungsod ng Changsha, Hunan

Vacuum Debinding and Sintering Furnace

Vacuum Debinding and Sintering Furnace

Vacuum debinding and sinter furnace is mainly suitable for debinding and sinter process of tungsten alloy, heavy alloy, moly alloy, titanium alloy and cemented carbide materials. The vacuum debinding sitering furnace is used for PEG, paraffin and rubber binder removing. It can also do vacuum sinter, partial pressure sinter and minor pressure sinter processes.

INQUIRY
  • Technical Tampok
  • Kaugnay na opsyonal na pagsasaayos

paglalarawan
Vacuum debinding and sinter furnace is mainly suitable for debinding and sinter process of tungsten alloy, heavy alloy, moly alloy, titanium alloy and cemented carbide materials. The vacuum debinding sitering furnace is used for PEG, paraffin and rubber binder removing. It can also do vacuum sinter, partial pressure sinter and minor pressure sinter processes.

Specifications of Vacuum Debinding and Sinter Furnace

SpecModelVDSF-030306VDSF-040408VDSF-040415VDSF-050520
Working Zone Size W×H×L (mm)300 × 300 × 600400 × 400 × 800400 × 400 × 1500500 × 500 × 2000
Max.Weight(kg) (not mean actual load weight)100200400900
Max.temperatura (°C)1550155015501550
Pagkakatulad ng Temperatura (°C)± 4± 4± 5± 5
Lakas ng Pag-init (kW)7590120220
Ultimate Vacuum (Pa)1111
Rate ng Pagtaas ng Presyon (Pa/h)≤0.67≤0.67≤0.67≤0.67
Debinding gasAr/N2/H2Ar/N2/H2Ar/N2/H2Ar/N2/H2
Ang mga parameter sa itaas ay maaaring iakma sa mga kinakailangan sa proseso, hindi sila bilang pamantayan sa pagtanggap, ang detalye ng detalye. ilalahad sa panukalang teknikal at mga kasunduan.

Technical Tampok
1. Ang espesyal na dinisenyo na debinding muffle ay pinagtibay na may mahusay na sealing at kumpletong bind na naaalis, na pumipigil sa polusyon sa loob ng mga bahagi.
2. It has functions of slow vacuum, vacuum pre-sinter, minor negative pressure debinding, TOWAC debinding and minor positive pressure debinding.
3. The furnace adopts advanced refractory structure and materials, which features good insulation performance and less heat absorption. It can save more than 20% energy compare o previous design.
4. Vacuum debinding and sinter furnace works by using touch screen operation and PLC central control, which makes the operation simple and reliable.
5. The vacuum debinding sitering furnace uses special hot zone structure and heating element design, assuring good temperature uniformity.
6.The furnace has the functions of over temperature and over pressure fault alarm, mechanical automatic pressure protection and interlocking, which forms a highly safe furnace.
7. Ito ay may remote control na operasyon, remote malfunction diagnosis at remote program update functions.

Optional Configuration of Vacuum Debinding and Sinter Furnace
1. Furnace door: hinge turning type, manual tight/auto lock-ring tight
2. Lalagyan ng hurno: Lahat ng carbon steel/Inner layer stainless steel/Kabuuang hindi kinakalawang na asero
3. Furnace hot zone: Soft carbon felt+Hard composite felt/all hard composite felt
4. Heater material: isostatic press graphite
5. 5.Muffle material: fine size graphite/ isostatic press graphite
6. Pagkontrol sa proseso ng gas: Volume/mass flow-meter, manual value/auto value, Foreign brand/Chinese brand
7. Vacuum pump at gauge: Foreign brand/Chinese brand
8. Load truck: uri ng roller/uri ng tinidor
9. Operation panel: simulation screen/touch screen/industrial computer
10. PLC: OMRON/Siemens
11. Temperature controller: SHIMADEN/EUROTHERM
12. Thermocouple: C type(tungsten sheath/Moly sheath/ceramic sheath)
13. Recorder: Paperless recorder/paper recorder, Foreign brand/Chinese brand
14. Mga de-kuryenteng bahagi: CHINT/Schneider/Siemens

INQUIRY

Kaugnay na Mga Produkto


lugar
ACME Xingsha Industrial Park, East Liangtang Rd. , Lungsod ng Changsha, Hunan
telepono
+ 86-151 7315 3690( Jessie Mobile)
E-mail
overseas@sinoacme.cn
Tungkol sa Amin

Itinatag noong 1999, ang ACME (Advanced Corporation for Materials & Equipments) ay matatagpuan sa Xingsha Industrial Park, na may lawak na 100,000 m2. Ang ACME ay isang high-tech na enterprise na dalubhasa sa paggawa ng mga kagamitan sa pag-init ng industriya para sa bagong materyal at enerhiya. patakaran sa paglilihim | Mga Tuntunin at Kundisyon

Makipag-ugnayan sa amin