Vacuum Carbonization Furnace

Ang furnace na ito ay ginagamit para sa mababang temperatura at mataas na temperatura na carbonization ng mga composite na materyales. Maaari rin itong gamitin para sa pag-debinding at sintering ng mga espesyal na materyales sa ilalim ng oxygen na kapaligiran. Mayroon itong parehong pahalang at patayong mga istraktura.

INQUIRY

Technical Tampok
Kaugnay na opsyonal na pagsasaayos

paglalarawan
Ang furnace na ito ay ginagamit para sa mababang temperatura at mataas na temperatura na carbonization ng mga composite na materyales. Maaari rin itong gamitin para sa pag-debinding at sintering ng mga espesyal na materyales sa ilalim ng oxygen na kapaligiran. Mayroon itong parehong pahalang at patayong mga istraktura.

High temperature carbonization: Using graphite heating element, the max. temperature can reach above 1600℃.

Low temperature carbonization: Using all metal hot zone, the max. temperature is 1100℃.

application:It is used for carbonization and pyrolysis of carbon fiber insulation materials, C/C composite and etc.

Specifications of Vacuum Carbonization Furnace

ModelSpec	Laki ng Working Zone (W × H × L) (mm)	Max. Temperatura (°C)	Pagkakatulad ng Temperatura (°C)	Ultimate Vacuum (Pa)	Rate ng Pagtaas ng Presyon (Pa/h)
HVC-060609	600 × 600 × 900	1500	± 7.5	1-100	2
HVC-101015	1000 × 1000 × 1500	1500	± 10	1-100	2
HVC-131320	1300 1300 × × 2000	1500	± 10	1-100	2
HVC-161633	1600 1600 × × 3300	1500	± 15	1-100	2
HVC-161570	1600 1500 × × 7000	1500	± 15	1-100	2
HVC-201840	2000 1800 × × 4000	1500	± 15	1-100	2

VVC-0608	φ600 × 800	1500 / 1000	±5/± 10	1-100	2
VVC-1015	Φ1000 × 1500	1500 / 1000	±5/± 10	1-100	2
VVC-1120	φ1100 × 2000	1500 / 1000	±5/± 10	1-100	2
VVC-1320	φ1300 × 2000	1500 / 1000	±5/± 10	1-100	2
VVC-1620	φ1600 × 2000	1500 / 1000	±15/± 20	1-100	2
VVC-1730	φ1700 × 3000	1500 / 1000	± 15	1-100	2
VVC-1822	φ1800 × 2200	1500 / 1000	± 15	1-100	2
VVC-2032	Φ2000 × 3200	1500 / 1000	± 20	1-100	2
VVC-2632	Φ2600 × 3200	1500 / 1000	± 20	1-100	2
VVC-3338	Φ3300 × 3800	1500 / 1000	± 20	1-100	2
Ang mga parameter sa itaas ay maaaring iakma sa mga kinakailangan sa proseso, hindi sila bilang pamantayan sa pagtanggap, ang detalye ng detalye. ilalahad sa panukalang teknikal at mga kasunduan.

Technical Tampok

1. Using multiple temperature control zones, great temperature uniformity;

2. It configured with external forced cooling system to shorten the production cycle;

3. Using positive or negative pressure carbonization process;

4. It has treatment for the tar, solid dust and exhaust gases during the carbonization process;

5. Using all metal high temperature muffle, it can work in oxygen, and has great anti-contamination feature, it can also working in various gases and conditions.

Optional Configuration of Vacuum Carbonization Furnace

1. Furnace door: screw/hydraulic/manual elevation type; swing opening/parallel opening(large size furnace door); manual tight/ auto lock-ring tight

2. Furnace vessel：all carbon steel/inner layer stainless steel/all stainless steel

3. Furnace hot zone：Refractory brick+ceramic fiber/soft carbon felt+Rigid board

4. Heating element：Ni-Cr；Fe-Cr-Al；Fe-Cr-Al-Nb；Fe-Cr-Al-Mo/ Graphite

5. Muffle：SUS304；SUS316L；SUS310S/Graphite

6. Process gas system：volume/mass flow-meter

7. Thermocouple：K type/N type/C type/S type