mENU

Tahanan>Mga Produkto>C&SiC Composites Industrial Heating Equipment

Makipag-ugnay sa

+86-151 7315 3690( Jessie Mobile)

overseas@sinoacme.cn

ACME Xingsha Industrial Park, East Liangtang Rd. , Lungsod ng Changsha, Hunan

Gas Pressure Sinter Furnace

Gas Pressure Sinter Furnace

It is used for vacuum sintering and pressure sintering of ceramic products. It has both horizontal and vertical structures. Debinding is an option function.

INQUIRY
  • Technical Tampok
  • Kaugnay na opsyonal na pagsasaayos

paglalarawan
It is used for vacuum sintering and pressure sintering of ceramic products. It has both horizontal and vertical structures. Debinding is an option function.

application:Ceramic part such as SiC, Si3N4, B4C, AlN and etc.

Specifications of Vacuum Sintering Furnace

ModelSpec

Working Zone Size

(W×H×L) (mm)

Max. Temperature (°C)Pagkakatulad ng Temperatura (°C)Ultimate Vacuum (Pa)Max. Pressure (MPa)
HPSF-4412400 400 × × 12001500-2000±5/± 101-10010
HPSF-5512500 500 × × 12001500-2000±5/± 101-10010
HPSF-5518500 500 × × 18001500-2000±5/± 101-10010

VPSF-0203φ200 × 3001500-2000±5/± 101-10010
VPSF-0308φ300 × 8001500-2000±5/± 101-10010
VPSF-0612φ600 × 12001500-2000±5/± 101-10010
VPSF-0716φ700 × 16001500-2000±5/± 101-10010
VPSF-0815φ800 × 15001500-2000±5/± 101-10010
VPSF-0917φ900 × 17001500-2000±5/± 101-10010
The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements.

Technical Tampok

1.The furnace uses special hot zone structure and heating element design, good  temperature uniformity;

2.Using special designed debinding muffle which has good sealing, complete binder removing and no contamination to inside components features;

3.It has functions of vacuum sintering, pressure sintering, negative pressure debinding and etc;

4.It has over temperature and over pressure mal-function alarm, mechanical automatic pressure protection and interlocking, high safety protection;

5.It configured with debinding system to achieve debinding and sintering of ceramic products.


Optional Configuration of Gas Pressure Sinter Furnace

1.Furnace door: screw/hydraulic/manual elevation; manual tight/ auto lock-ring tight

2.Furnace vessel: all carbon steel/inner layer stainless steel/all stainless steel

3.Furnace hot zone: soft carbon felt/soft graphite felt/hard composite felt/CFC

4.Heating element and muffle: isostatic press graphite/high purity, strength and density graphite/fine size graphite

5.Process gas system: volume/mass flow-meter

6.Thermocouple: K type/N type/C type/S type

INQUIRY

Kaugnay na Mga Produkto


lugar
ACME Xingsha Industrial Park, East Liangtang Rd. , Lungsod ng Changsha, Hunan
telepono
+ 86-151 7315 3690( Jessie Mobile)
E-mail
overseas@sinoacme.cn
Tungkol sa Amin

Itinatag noong 1999, ang ACME (Advanced Corporation for Materials & Equipments) ay matatagpuan sa Xingsha Industrial Park, na may lawak na 100,000 m2. Ang ACME ay isang high-tech na enterprise na dalubhasa sa paggawa ng mga kagamitan sa pag-init ng industriya para sa bagong materyal at enerhiya. patakaran sa paglilihim | Mga Tuntunin at Kundisyon

Makipag-ugnayan sa amin