pag-uuri
Makipag-ugnay sa
+86-151 7315 3690( Jessie Mobile)
ACME Xingsha Industrial Park, East Liangtang Rd. , Lungsod ng Changsha, Hunan
CC / Carbon-ceramic na Kagamitan sa Paghahanda ng Brake Disc
This furnace is mainly used for the production of high performance brake disc used in Automobile, Bullet train, Tank, Aircraft and etc.
- Technical Tampok
- Kaugnay na opsyonal na pagsasaayos
paglalarawan
This furnace is mainly used for the production of high performance brake disc used in Automobile, Bullet train, Tank, Aircraft and etc.
Proseso ng teknolohiya:
1.Carbon fiber preform → high temperature treatment → pressure infiltration → carbonization → machining → graphitization → ceramization → subsequent process
2.Carbon fiber preform → high temperature treatment → CVD → machining → graphitization → ceramization → subsequent process
| CC / Carbon-ceramic na Kagamitan sa Paghahanda ng Brake Disc | ||||||
| Uri ng Kagamitan | Chemical vapor deposition furnace | Vacuum graphitization furnace | ||||
| Spec/Modelo | VCVD-0610-C | VCVD-1120-C | HCVD-121220-C | VIG-0610-C | VIG-1120-C | HVG-131320-C |
| Working Zone Size (W × H × L) (mm) | φ600 × 1000 | φ1100 × 2000 | 1200 1200 × × 2000 | φ600 × 1000 | φ1100 × 2000 | 1300 1300 × × 2000 |
| Max. Temperatura (°C) | 1200 | 1200 | 1200 | 2600 | 2600 | 2600 |
| Pagkakatulad ng Temperatura (°C) | ± 5 | ± 7.5 | ± 15 | ± 15 | ± 20 | ± 15 |
| Ultimate Vacuum (Pa) | 50 | 50 | 50 | 50 | 50 | 50 |
| Uri ng Kagamitan | Siliconizing furnace | Vacuum carbonization furnace | Vacuum pressure Infiltration furnace | ||||
| Spec/Mode | ISII-0610 | ISII-1120 | VSII-121220 | VVC-0608 | VVC-1120 | VPI-0608 | VPI-1120 |
| Usable Space (W × H × L) (mm) | φ600 × 1000 | φ1100 × 2000 | 1200 1200 × × 2000 | φ600 × 800 | φ1000 × 1500 | φ600 × 800 | Φ1000× 2000 |
| Max. Temperatura (°C) | 2000 | 2000 | 2000 | 1000 | 1000 | 400 | 400 |
| Pagkakatulad ng Temperatura (°C) | ± 15 | ± 20 | ± 15 | ± 10 | ± 10 | ± 10 | ± 10 |
| Ultimate Vacuum (Pa) | 50 | 50 | 50 | 50 | 50 | 50 | 50 |
| Max. Presyon (MPa) | / | / | / | / | / | 5 | 5 |
| Ang mga parameter sa itaas ay maaaring iakma sa mga kinakailangan sa proseso, hindi sila bilang pamantayan sa pagtanggap, ang detalye ng detalye. ilalahad sa panukalang teknikal at mga kasunduan. | |||||||
Optional Configuration of C-C / Carbon-ceramic Brake Disc Preparation Equipment
1. Pinto ng hurno: turnilyo/haydroliko/manu-manong elevation; manu-manong masikip/ auto lock-ring masikip
2.Furnace vessel: all carbon steel/inner layer stainless steel/all stainless steel/Q345
3.Furnace hot zone: soft carbon felt/soft graphite felt/rigid composite board/Refractory brick+ceramic fiber /CFC
4.Heating element : isostatic press graphite/high purity, strength and density graphite/Ni-Cr; Fe-Cr-Nb
5.Muffle: press high purity, high purity, strength and density graphite/fine size graphite/SUS310S
6. Proseso ng gas system: volume/mass flow-meter
7. Thermocouple: C type/ S type/ K type/ N type
8.Pyro-meter: Single color/Dual-color; CHINO/Raytek
