Batch Type Purification Furnace

Furnace is used for purify treatment of graphite powder, graphite part, insulation materials and etc.

INQUIRY

Technical Tampok
Kaugnay na opsyonal na pagsasaayos

paglalarawan
Furnace is used for purify treatment of graphite powder, graphite part, insulation materials and etc.

application: Graphite part, graphite powder, carbon nano-tube, graphene and etc.

Specifications of Batch Type Purification Furnace

ModelSpec	Laki ng Working Zone (D × H ) (mm)	Max. Temperatura (°C)	Section Temperature Uniformity (°C)	Ultimate Vacuum (Pa)	Rate ng Pagtaas ng Presyon (Pa/h)
HPF-050511	500 500 × × 1100	2200-3000	±± 5 / 15 ±	1-100	0.67
HPF-060609	600 600 × × 900	2200-3000	± 5 / 20 ±	1-100	0.67
HPF-101015	1000 1000 × × 1500	2200-3000	± 5 / 20 ±	1-100	0.67
HPF-131320	1300 1300 × × 2000	2200-3000	± 5 / 20 ±	1-100	0.67

VPF-0305	φ300 × 500	2200-3000	± 5 / 20 ±	1-100	0.67
VPF-0708	φ700 × 800	2200-3000	± 5 / 20 ±	1-100	0.67
VPF-1120	φ1100 × 2000	2200-3000	± 5 / 20 ±	1-100	0.67
VPF-1520	φ1500 × 2000	2200-3000	± 5 / 20 ±	1-100	0.67
Ang mga parameter sa itaas ay maaaring iakma sa mga kinakailangan sa proseso, hindi sila bilang pamantayan sa pagtanggap, ang detalye ng detalye. ilalahad sa panukalang teknikal at mga kasunduan.

Technical Tampok

1.It combined high temperature and chemical purification method;

2.Using unique ACME super high temperature and high current power supply technology, it can long term stable use at 2600℃;

3.Using multiple temperature control zones, great temperature uniformity;

4.Using special designed high temperature pyro-meter measuring technoloy with precision temperature control and small deviation;

5.Using induction heating, the max. temperature can reach upto 3000℃,But it can only be purified by high temperature method, and it is difficult to use chemical method.

Optional Configuration of Batch Type Purification Furnace

1.Furnace door: screw/hydraulic/manual elevation type; manual tight/ auto lock-ring tight

2.Furnace vessel: lahat ng carbon steel/inner layer stainless steel/lahat ng stainless steel

3.Furnace hot zone: soft carbon felt/soft graphite felt/hard composite felt/CFC

4. Heating element at muffle: isostatic press graphite/high purity, strength and density graphite/fine size graphite

5.Process gas system: volume/mass flow-meter; manual valve/auto valve;

6. Thermocouple: C type/S type/R type/B type

7.Pyro-meter: Dual-color/Single color; CHINO/Raytek