Continuous Sinter Furnace

It is used for continous sintering of ceramic products, ceramic powder materials and fibers.

පරීක්ෂණයක්

විස්තර
It is used for continous sintering of ceramic products, ceramic powder materials and fibers.

අයදුම්පත:Ceramic products such as SiC, Si3N4 and AlN.

Specifications of Continuous Sinter Furnace

ModelSpec	Working Zone Size (D × H ) (mm)	Max. Temperature (°C)	Section Temperature Uniformity (°C)	ගෑස් සැකසීම
CSF-0202	200 × 200	1700/1900/2400	5 ±/±7.5	ගුවන්/එන්₂/Ar/H₂
CSF-0303	300 × 300	1700/1900/2400	5 ±/7.5 ±	Air/N₂/Ar/H₂
CSF-0404	400 × 400	1700/1900/2400	5 ±/7.5 ±	Air/N₂/Ar/H₂
ඉහත පරාමිතීන් ක්‍රියාවලි අවශ්‍යතා අනුව සකස් කළ හැක, ඒවා පිළිගැනීමේ ප්‍රමිතිය, විස්තර පිරිවිතර ලෙස නොවේ. තාක්ෂණික යෝජනාව සහ ගිවිසුම්වල සඳහන් වනු ඇත.

තාක්ෂණික විශේෂාංග

1.To use newly develop high temperature heating technology, with high temperature and long service life;

2.Load and unload continuously, good sealing performance and low gas consumption;

3.It can be used for continuous sintering of ceramic part, and continuous sintering of powder material;

4.Automatic load, push, unload and discharge for powder, stable quality and less labor;

5.Furnace hot zone length can be customized design.

Optional Configuration of Continuous Sinter Furnace

1.Insulation material: graphite felt/carbon felt/ceramic fiber felt/graphite brick/ceramic brick

2.Heating element: C/C composite/ graphite/ metal/ SiC

3.Muffle: C/C composite/ graphite/ ceramic/ metal

4.Process gas system: volume flow-meter

5.Thermocouple: C type/S type/K type/N type

6.Pyro-meter：Dual-color/Single color; CHINO/Raytek