classificação
- Equipamento de tratamento térmico a vácuo
- Equipamento de aquecimento industrial de metalurgia do pó
- Equipamento de aquecimento industrial de compostos C & SiC
- Equipamento de fabricação de pó de atomização
- Novo material
- Equipamento de Pirólise Térmica de Resíduos Sólidos Orgânicos
- Material de carbono de alta pureza e componente de grafite revestido
Contato
+86-151 7315 3690 (Jessie Mobile)
Parque Industrial ACME Xingsha, East Liangtang Rd. , Cidade de Changsha, Hunan
Forno de Brasagem de Alumínio a Alto Vácuo
High vacuum aluminum brazing furnace is applied for vacuum brazing of materials like heat exchanger, air condition evaporator, condenser, radar grid antenna, wave-guide tube, etc.
- Características Técnicas
- Configuração opcional relacionada
Descrição
High vacuum aluminum forno de brasagem is applied for vacuum brazing of materials like heat exchanger, air condition evaporator, condenser, radar grid antenna, wave-guide tube, etc
Specification of High Vacuum Aluminum Brazing Furnace
| Parâmetro / Modelo | VAB-335S | VAB-446S | VAB-557S | VAB-669S |
| Tamanho efetivo da zona quente L×A×L (mm) | 300 × 300 × 500 | 400 × 400 × 600 | 500 × 500 × 700 | 600 × 600 × 900 |
| Capacidade de carga (kg) | 200 | 200 | 300 | 400 |
| Potência de aquecimento (kW) | 45 | 45 | 75 | 90 |
| máx. temperatura (°C) | 700 | 700 | 700 | 700 |
| Uniformidade de temperatura (°C) | ± 3 | ± 3 | ± 3 | ± 3 |
| Grau de vácuo (Pa) | 8×10⁻⁴ | 8×10⁻⁴ | 8×10⁻⁴ | 8×10⁻⁴ |
| Pressure Increasing Rate (Pa/h) | ≤ 0.26 | ≤ 0.26 | ≤ 0.26 | ≤ 0.26 |
| ≤ 0.65 | ≤ 0.65 | ≤ 0.65 | ≤ 0.65 |
| Parâmetro / Modelo | VAB-7711S | VAB-8812S | VAB-9915S | VAB-121230S |
| Tamanho efetivo da zona quente L×A×L (mm) | 700 × 700 × 1100 | 800 × 800 × 1200 | 900 × 900 × 1500 | 1200 × 1200 × 3000 |
| Capacidade de carga (kg) | 800 | 1000 | 1200 | 3000 |
| Potência de aquecimento (kW) | 180 | 210 | 300 | 660 |
| máx. temperatura (°C) | 700 | 700 | 700 | 700 |
Uniformidade da temperatura (° C) | ± 3 | ± 3 | ± 3 | ± 3 |
| Grau de vácuo (Pa) | 8×10⁻⁴ | 8×10⁻⁴ | 8×10⁻⁴ | 8×10⁻⁴ |
Pressure Increasing Rate (Pa/h) | ≤ 0.26 | ≤ 0.26 | ≤ 0.26 | ≤ 0.26 |
| ≤ 0.65 | ≤ 0.65 | ≤ 0.65 | ≤ 0.65 |
Características Técnicas
1.The aluminum brazing tube furnace structure is horizontal, single chamber and loading horizontally.
2.The furnace hearth consists of several zones, wide nickle-chromium alloy heater and multiple layer stainless steel heat insulation, which has a good temperature uniformity.
3.The vacuum system inlet is configured with gas condensate steering device and filter collection device, preventing welding vapor polluting the vacuum pump.
4.Unique rear insulation technology assures larger radiation area and better insulation performance.
Optional Configuration of High Vacuum Aluminum Brazing Furnace
1.Furnace door type: on-line/off-line, vertically up and down, rotating
2.Vacuum pump and gauge: Foreign brand/high-quality Chinese brand
3.PLC: OMRON/Siemens/Mitsubishi
4.Temperature controller: SHIMADEN/EUROTHERM/Honeywell
5.Thermocouple: S type, K type, K type
6.Recorder: Paperless recorder/paper recorder
7.HMI: Simulation screen/Touch screen with industry computer
8.Electric component: high-quality Chinese brand/Schneider/Siemens
