classificação
- Equipamento de tratamento térmico a vácuo
- Equipamento de aquecimento industrial de metalurgia do pó
- Equipamento de aquecimento industrial de compostos C & SiC
- Equipamento de fabricação de pó de atomização
- Novo material
- Equipamento de Pirólise Térmica de Resíduos Sólidos Orgânicos
- Material de carbono de alta pureza e componente de grafite revestido
Contato
+86-151 7315 3690 (Jessie Mobile)
Parque Industrial ACME Xingsha, East Liangtang Rd. , Cidade de Changsha, Hunan
High Vacuum Sintering Furnace
High vacuum sintering furnace is mainly applied for sintering processes of tungsten alloy, magnetic, heavy alloy, moly alloy, cemented carbide and ZrO blacken treatment.
- Características Técnicas
- Configuração opcional relacionada
Descrição
Alta vacuum sintering furnace is mainly applied for sintering processes of tungsten alloy, magnetic, heavy alloy, moly alloy, cemented carbide and ZrO blacken treatment.
Specifications of High Vacuum Forno de sinterização
Modelo de especificação | VS-020203 | VS-040412 | VS-060612 | VS-060612 |
Working Zone Size (W×H×L)(mm) | 200 200 × 300 | 400 400 × 1200 | 600 600 × 1200 | 800 800 × 1200 |
Max.Weight (kg) (not mean actual load weight) | 30 | 300 | 600 | 1000 |
Max.temperature of vacuum sintering furnace (°C) | 1550 | 1550 | 1550 | 1550 |
Uniformidade de temperatura (°C) | ± 3 | ± 3 | ± 5 | ± 5 |
Potência de aquecimento (kW) | 45 | 90 | 180 | 270 |
Ultimate Vacuum (Pa) | 2 × 10-3 | 2 × 10-3 | 2 × 10-3 | 2 × 10-3 |
Taxa de Aumento de Pressão (Pa/h) | 0.67 | 0.67 | 0.67 | 0.67 |
Gás de processo | Ar/N2 | Ar/N2 | Ar/N2 | Ar/N2 |
The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements. |
Características Técnicas
1. The furnace uses special hot zone structure and heating element design, which features temperature uniformity.
2. It adopts advanced refractory structure and materials, which features good insulation performance and less heat absorption. It can save more than 20% energy compare previous design.
3. The touch screen operation and PLC central control are adopted to make the operation simple and reliable.
4. Vacuum sinter furnace has functions of slow vacuum, vacuum sinter, minor positive pressure sinter and partial pressure sinter.
5. The vacuum sintering furnace has the functions of over temperature and over pressure fault alarm, mechanical automatic pressure protection and interlocking, which forms a highly safe furnace.
6. It has remote control operation, remote malfunction diagnosis and remote program update functions.
Optional Configuration of Vacuum Sinter Furnace
1.Furnace door: Hinge turning type, manual tight/auto lock-ring tight
2. Furnace vessel: All carbon steel/Inner layer stainless steel/Total stainless steel
3. Furnace hot zone: Soft carbon felt+Hard composite felt /all hard composite carbon felt
4.Heater material: isostatic press graphite/molybdenum-lanthanum alloy/tungsten alloy
5. Process gas control: Volume/mass flow-meter, manual value/auto value, Foreign brand/Chinese brand
6. Vacuum pump and gauge: Foreign brand/Chinese brand
7. Load truck: roller type/fork type
8. Operation panel: simulation screen/touch screen/industrial computer
9. PLC: OMRON/Siemens
10. Temperature controller: SHIMADEN/EUROTHERM
11. Thermocouple: C type(tungsten sheath/Moly sheath/ceramic sheath)
12. Registrador: Registrador sem papel/gravador de papel, marca estrangeira/marca chinesa
13. Electric components: CHINT/Schneider/Siemens