Forno de carbonização a vácuo

This furnace is used for low temperature and high temperature carbonization of composite materials. It can also be used for debinding and sintering of special materials under oxygen atmosphere. It has both horizontal and vertical structures.

MENSAGEM

Características Técnicas
Configuração opcional relacionada

Descrição
This furnace is used for low temperature and high temperature carbonization of composite materials. It can also be used for debinding and sintering of special materials under oxygen atmosphere. It has both horizontal and vertical structures.

High temperature carbonization: Using graphite heating element, the max. temperature can reach above 1600℃.

Low temperature carbonization: Using all metal hot zone, the max. temperature is 1100℃.

Aplicação:It is used for carbonization and pyrolysis of carbon fiber insulation materials, C/C composite and etc.

Especificações de Vacuum Carbonization Fornalha

Especificação do modelo	Tamanho da zona de trabalho (L × A × C) (mm)	Máx. Temperatura (°C)	Uniformidade de temperatura (°C)	Vácuo Final (Pa)	Taxa de Aumento de Pressão (Pa/h)
HVC-060609	600 600 × 900	1500	± 7.5	1-100	2
HVC-101015	1000 1000 × 1500	1500	± 10	1-100	2
HVC-131320	1300 × 1300 × 2000	1500	± 10	1-100	2
HVC-161633	1600 × 1600 × 3300	1500	± 15	1-100	2
HVC-161570	1600 × 1500 × 7000	1500	± 15	1-100	2
HVC-201840	2000 × 1800 × 4000	1500	± 15	1-100	2

VVC-0608	Φ600 × 800	1500/1000	±5/± 10	1-100	2
VVC-1015	Φ1000 × 1500	1500/1000	±5/± 10	1-100	2
VVC-1120	Φ1100 × 2000	1500/1000	±5/± 10	1-100	2
VVC-1320	Φ1300 × 2000	1500/1000	±5/± 10	1-100	2
VVC-1620	Φ1600 × 2000	1500/1000	±15/± 20	1-100	2
VVC-1730	Φ1700 × 3000	1500/1000	± 15	1-100	2
VVC-1822	Φ1800 × 2200	1500/1000	± 15	1-100	2
VVC-2032	Φ2000 × 3200	1500/1000	± 20	1-100	2
VVC-2632	Φ2600 × 3200	1500/1000	± 20	1-100	2
VVC-3338	Φ3300 × 3800	1500/1000	± 20	1-100	2
Os parâmetros acima podem ser ajustados aos requisitos do processo, eles não são padrão de aceitação, especificações detalhadas. serão indicados na proposta técnica e nos acordos.

Características Técnicas

1. Using multiple temperature control zones, great temperature uniformity;

2. It configured with external forced cooling system to shorten the production cycle;

3. Using positive or negative pressure carbonization process;

4. It has treatment for the tar, solid dust and exhaust gases during the carbonization process;

5. Using all metal high temperature muffle, it can work in oxygen, and has great anti-contamination feature, it can also working in various gases and conditions.

Optional Configuration of Vacuum Carbonization Furnace

1. Furnace door: screw/hydraulic/manual elevation type; swing opening/parallel opening(large size furnace door); manual tight/ auto lock-ring tight

2. Furnace vessel：all carbon steel/inner layer stainless steel/all stainless steel

3. Furnace hot zone：Refractory brick+ceramic fiber/soft carbon felt+Rigid board

4. Heating element：Ni-Cr；Fe-Cr-Al；Fe-Cr-Al-Nb；Fe-Cr-Al-Mo/ Graphite

5. Muffle：SUS304；SUS316L；SUS310S/Graphite

6. Process gas system：volume/mass flow-meter

7. Thermocouple：K type/N type/C type/S type