MENU

Início>Produtos>Equipamento de fabricação de pó de atomização

Contate-nos

+ 86-13469050805 (Leo Mobile)

[email protegido]|[email protegido]

Parque Industrial ACME Xingsha, East Liangtang Rd. , Cidade de Changsha, Hunan | 220012, Minsk, ul. Kalinin 7B

Gas Atomization Powder Production Equipment

Gas Atomization Powder Production Equipment

The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.

MENSAGEM
  • Características Técnicas
  • Configuração opcional relacionada

1. Breve introdução
The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.


2. Equipment Features

  • Can produce most of the metal and alloy powders at low cost.

  • The metal powder is sub-spherical or irregular;

  • The metal melt solidifies quickly without segregation;

  • The particle size distribution of the powder can be controlled through appropriate process adjustment.


3. Especificação técnica principal

ModeloACME/GA-10ACME/GA-50

ACME

/GA-100

ACME/

GA-200

ACME/

GA-300

Melting temperature(℃)1750
Tipo de energiaAC/380V/50Hz

Capacidade

(kg)

1050100200300

Melting furnace power

(kW)

50
100160250300
Tundish heating methodmedium frequency induction / resistance heating
Tundish power(kW)15-45
Medição de temperaturaInfrared temperature measurement/W/Re 5/26
Gas flowL/min)8000-30000
método de resfriamentoCooling tower / water cooling unit + heat exchanger


4. Configuration selection

  • Medium Frequency power supply: IGBT;KGPS

  • HMI: Analog screen; computer touch screen

  • Control method: Industrial computer, PLC

  • Other components:  High-quality Chinese brand; Foreign brand

  • it can also be adjusted according to different technical requirements to do customized design

1. Breve introdução
The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.


2. Equipment Features

  • Can produce most of the metal and alloy powders at low cost.

  • The metal powder is sub-spherical or irregular;

  • The metal melt solidifies quickly without segregation;

  • The particle size distribution of the powder can be controlled through appropriate process adjustment.


3. Especificação técnica principal

ModeloACME/GA-10ACME/GA-50

ACME

/GA-100

ACME/

GA-200

ACME/

GA-300

Melting temperature(℃)1750
Tipo de energiaAC/380V/50Hz

Capacidade

(kg)

1050100200300

Melting furnace power

(kW)

50
100160250300
Tundish heating methodmedium frequency induction / resistance heating
Tundish power(kW)15-45
Medição de temperaturaInfrared temperature measurement/W/Re 5/26
Gas flowL/min)8000-30000
método de resfriamentoCooling tower / water cooling unit + heat exchanger


4. Configuration selection

  • Medium Frequency power supply: IGBT;KGPS

  • HMI: Analog screen; computer touch screen

  • Control method: Industrial computer, PLC

  • Other components:  High-quality Chinese brand; Foreign brand

  • it can also be adjusted according to different technical requirements to do customized design


MENSAGEM

Produtos relacionados


Localização
Parque Industrial ACME Xingsha, East Liangtang Rd. , Cidade de Changsha, Hunan | 220012, Minsk, ul. Kalinin 7B
Telefone
+ 86-13469050805 (Leo Mobile)
E-Mail
[email protegido]
Quem somos

Fundada em 1999, a ACME (Advanced Corporation for Materials & Equipments) está localizada na Zona Industrial de Muyun, com uma área de 100,000 m2. ACME é uma empresa de alta tecnologia especializada na fabricação de equipamentos de aquecimento industrial para novos materiais e energia.

Fale conosco
Corporação Avançada para Materiais e Equipamentos| Mapa do site