klassifikazzjoni
- Tagħmir għat-Trattament tas-Sħana bil-Vakwu
- Tagħmir tat-Tisħin Industrijali tal-Metallurġija tat-Trab
- Tagħmir tat-Tisħin Industrijali tal-Kompożiti C&SiC
- Tagħmir tal-Manifattura tat-Trab tal-Atomizzazzjoni
- Materjal ġdid
- Tagħmir ta 'piroliżi termali ta' skart solidu organiku
- Materjal tal-karbonju ta 'purità għolja u komponent tal-grafita miksi
Ikkuntatjana
+86-151 7315 3690( Jessie Mobile)
ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan
Forn tal-Ibrejżjar tal-Aluminju b'Vakwu Għoli
High vacuum aluminum brazing furnace is applied for vacuum brazing of materials like heat exchanger, air condition evaporator, condenser, radar grid antenna, wave-guide tube, etc.
- Karatteristiċi tekniċi
- Konfigurazzjoni fakultattiva relatata
deskrizzjoni
High vacuum aluminum forn tal-ibbrejżjar is applied for vacuum brazing of materials like heat exchanger, air condition evaporator, condenser, radar grid antenna, wave-guide tube, etc
Specification of High Vacuum Aluminum Brazing Furnace
| Parametru / Mudell | VAB-335S | VAB-446S | VAB-557S | VAB-669S |
| Daqs effettiv taż-żona sħuna W×H×L (mm) | 300 × 300 500 × | 400 × 400 600 × | 500 × 500 700 × | 600 × 600 900 × |
| Loading capacity (kg) | 200 | 200 | 300 | 400 |
| Qawwa tat-Tisħin (kW) | 45 | 45 | 75 | 90 |
| Max. temperature (°C) | 700 | 700 | 700 | 700 |
| Uniformità tat-Temperatura (°C) | ± 3 | ± 3 | ± 3 | ± 3 |
| Grad tal-vakwu (Pa) | 8×10⁻⁴ | 8×10⁻⁴ | 8×10⁻⁴ | 8×10⁻⁴ |
| Pressure Increasing Rate (Pa/h) | ≤ 0.26 | ≤ 0.26 | ≤ 0.26 | ≤ 0.26 |
| ≤ 0.65 | ≤ 0.65 | ≤ 0.65 | ≤ 0.65 |
| Parametru / Mudell | VAB-7711S | VAB-8812S | VAB-9915S | VAB-121230S |
| Daqs effettiv taż-żona sħuna W×H×L (mm) | 700 × 700 1100 × | 800 × 800 1200 × | 900 × 900 1500 × | 1200 × 1200 3000 × |
| Loading capacity (kg) | 800 | 1000 | 1200 | 3000 |
| Qawwa tat-Tisħin (kW) | 180 | 210 | 300 | 660 |
| Max. temperature (°C) | 700 | 700 | 700 | 700 |
Uniformità tat-Temperatura (° C) | ± 3 | ± 3 | ± 3 | ± 3 |
| Grad tal-vakwu (Pa) | 8×10⁻⁴ | 8×10⁻⁴ | 8×10⁻⁴ | 8×10⁻⁴ |
Pressure Increasing Rate (Pa/h) | ≤ 0.26 | ≤ 0.26 | ≤ 0.26 | ≤ 0.26 |
| ≤ 0.65 | ≤ 0.65 | ≤ 0.65 | ≤ 0.65 |
Karatteristiċi tekniċi
1.The aluminum brazing tube furnace structure is horizontal, single chamber and loading horizontally.
2.The furnace hearth consists of several zones, wide nickle-chromium alloy heater and multiple layer stainless steel heat insulation, which has a good temperature uniformity.
3.The vacuum system inlet is configured with gas condensate steering device and filter collection device, preventing welding vapor polluting the vacuum pump.
4.Unique rear insulation technology assures larger radiation area and better insulation performance.
Optional Configuration of High Vacuum Aluminum Brazing Furnace
1.Furnace door type: on-line/off-line, vertically up and down, rotating
2.Vacuum pump and gauge: Foreign brand/high-quality Chinese brand
3.PLC: OMRON/Siemens/Mitsubishi
4.Temperature controller: SHIMADEN/EUROTHERM/Honeywell
5.Thermocouple: S type, K type, K type
6.Recorder: Paperless recorder/paper recorder
7.HMI: Simulation screen/Touch screen with industry computer
8.Electric component: high-quality Chinese brand/Schneider/Siemens
