klassifikazzjoni
Ikkuntatjana
+86-151 7315 3690( Jessie Mobile)
ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan
Ċinturin tal-malja Sinter Furnace
Mesh belt sinter furnace is mainly used for high temperature sinter of powder metallurgy ferrous and copper parts, such as oil bearing, gear, clutch plate, bushing, sleeve, etc.
- Karatteristiċi tekniċi
- Konfigurazzjoni fakultattiva relatata
deskrizzjoni
Mesh belt sinter furnace is mainly used for high temperature sinter of powder metallurgy ferrous and copper parts, such as oil bearing, gear, clutch plate, bushing, sleeve, etc.
Specifications of Mesh Belt Sinter Furnace
| SpecModel | MBSF-300/100-7 | MBSF-460/100-7 | MBSF-610/125-7 |
| Belt (mm) | 300 | 460 | 610 |
| Muffle (mm) | 90 | 100 | 125 |
| Żona tat-tisħin | 7 | 7 | 7 |
| Tul taż-żona tat-tisħin (mm) | 4000 + 5200 | 4500 + 5600 | 4600 + 6000 |
| Max.temperature (°C) | 1150 | 1150 | 1150 |
| Uniformità tat-Temperatura (°C) | ± 5 | ± 5 | ± 5 |
| Qawwa tat-Tisħin (kW) | 120 | 250 | 320 |
| Process gas of mesh belt sintering furnace | N2/ 3H2+N2/H2/ CH4 | N2/ 3H2+N2/H2/ CH4 | N2/ 3H2+N2/H2/ CH4 |
| Gas consumption (m³/h) | 15 | 20 | 30 |
| Daqs totali L×W×H (mm) | 21000 × 1500 × 1800 | 23500 × 1700 × 1900 | 23500 × 1900 × 2000 |
| The above specifications are defined according to ferrous part sinter. The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements. | |||
Karatteristiċi tekniċi
1. The furnace is configured with RBO rapid binder removal system as required.
2. Module type heating element is used , which is convenient for maintenance and replacement without stop the furnace.
2. All fiber refractory structure guarantees faster heating rate and less energy consumption.
3. Mesh belt sintering furnace uses hanging roof structure, which is convenient for maintenance and replacement of muffle.
4. Fast cooling system is available that is mainly for hardening the ferrous material.
5. Għandu funzjonijiet ta 'operazzjoni ta' kontroll mill-bogħod, dijanjosi ta 'ħsara mill-bogħod u funzjonijiet ta' aġġornament tal-programm mill-bogħod.
Optional Configuration of Mesh Belt Sinter Furnace
1. Refractory material: silicate aluminum fiber/ceramic fiber felt
2. Materjal tal-heater: 0Cr21Al6Nb, 0Cr27Al7Mo2
3. Muffle material: SiC+SiN/heat resistant steel
4. Mesh belt material: SUS310S, SUS314, SUS304
5. Kontroll tal-gass tal-proċess: Miter tal-fluss tal-volum/massa, valur manwali/valur awtomatiku, marka barranija/marka Ċiniża
6. Panel ta 'tħaddim: skrin ta' simulazzjoni/touch screen/kompjuter industrijali
7. PLC: OMRON/Siemens
8. Kontrollur tat-temperatura: SHIMADEN/EUROTHERM
9. Thermocouple: C type/K type/N type (tungsten sheath/Moly sheath/ceramic sheath)
10. Reġistratur: Reġistratur mingħajr karti/reġistratur tal-karti, marka Barranija/marka Ċiniża
11. Komponenti elettriċi: CHINT/Schneider/Siemens
