MENU

Id-dar>prodotti>Tagħmir tal-Manifattura tat-Trab tal-Atomizzazzjoni

Ikkuntatjana

+86-151 7315 3690( Jessie Mobile)

overseas@sinoacme.cn

ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan

Tagħmir tal-Produzzjoni tat-Trab tal-Atomizzazzjoni tal-Gass

Tagħmir tal-Produzzjoni tat-Trab tal-Atomizzazzjoni tal-Gass

The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.

INKJESTA
  • Karatteristiċi tekniċi
  • Konfigurazzjoni fakultattiva relatata

1. Introduzzjoni qasira
The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.


2. Equipment Features

  • Can produce most of the metal and alloy powders at low cost.

  • The metal powder is sub-spherical or irregular;

  • The metal melt solidifies quickly without segregation;

  • The particle size distribution of the powder can be controlled through appropriate process adjustment.


3. Speċifikazzjoni teknika ewlenija

mudellACME/GA-10ACME/GA-50

acme

/GA-100

ACME/

GA-200

ACME/

GA-300

Melting temperature(℃)1750
Tip ta 'enerġijaAC/380V/50Hz

Kapaċità

(kg)

1050100200300

Melting furnace power

(kW)

50
100160250300
Tundish heating methodmedium frequency induction / resistance heating
Tundish power(kW)15-45
Kejl tat-temperaturaInfrared temperature measurement/W/Re 5/26
Gas flowL/min)8000-30000
metodu tkessiħCooling tower / water cooling unit + heat exchanger


4. Għażla tal-konfigurazzjoni

  • Medium Frequency power supply: IGBT;KGPS

  • HMI: Analog screen; computer touch screen

  • Control method: Industrial computer, PLC

  • Other components:  High-quality Chinese brand; Foreign brand

  • it can also be adjusted according to different technical requirements to do customized design

1. Introduzzjoni qasira
The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.


2. Equipment Features

  • Can produce most of the metal and alloy powders at low cost.

  • The metal powder is sub-spherical or irregular;

  • The metal melt solidifies quickly without segregation;

  • The particle size distribution of the powder can be controlled through appropriate process adjustment.


3. Configuration selection

  • Medium Frequency power supply: IGBT;KGPS

  • HMI: Analog screen; computer touch screen

  • Control method: Industrial computer, PLC

  • Other components:  High-quality Chinese brand; Foreign brand

  • it can also be adjusted according to different technical requirements to do customized design


INKJESTA

Prodotti relatati


post
ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan
phone
+ 86-151 7315 3690( Jessie Mobile)
E-Mail
overseas@sinoacme.cn
Fuqna

Imwaqqfa fl-1999, ACME (Advanced Corporation for Materials & Equipments) tinsab f'Xingsha Industrial Park, b'erja ta '100,000 m2. ACME hija intrapriża ta 'teknoloġija għolja speċjalizzata fil-manifattura ta' tagħmir tat-tisħin tal-industrija għal materjal u enerġija ġdida. Regoli tal-privatezza | Termini u Kundizzjonijiet

Ikkuntatjana