MENU

Laman Utama>Produk>Peralatan Pemanasan Industri Metalurgi Serbuk

Hubungi Kami

+86-151 7315 3690( Jessie Mobile)

luar negara@sinoacme.cn

ACME Xingsha Industrial Park, East Liangtang Rd. , Bandar Changsha, Hunan

Pressure  Furnace

Pressure Furnace

Pressure furnace is used for cooper and tungsten alloy vacuum infiltration, and for vacuum sintering and pressure sintering of heavy alloy, moly alloy and cemented carbide.

INQUIRY
  • Ciri-ciri teknikal
  • Konfigurasi pilihan yang berkaitan

Deskripsi
Pressure furnace is used for cooper and tungsten alloy vacuum infiltration, and for vacuum sintering and pressure sintering of heavy alloy, moly alloy and cemented carbide.

Ciri-ciri teknikal
1. The furnace adopts special hot zone structure and heating element design, which features good temperature uniformity.
2. Special designed debinding muffle is adopted with good sealing and complete bind removable, preventing inside components pollution. 
3.Pressure infiltration furnace has functions of slow vacuum, minor positive pressure sinter, partial pressure sinter, pressure sinter, minor negative pressure debinding and minor positive pressure debinding.
4. The Pressure Infiltration Furnace adopts advanced refractory structure and materials, which features good insulation performance and less heat absorption. It can save more than 20% energy compare to previous design. 
5. The touch screen operation and PLC central control are used to make the operation simple and reliable. 
6. The furnace has the functions of over temperature and over pressure fault alarm, mechanical automatic pressure protection and interlocking, which forms a highly safe furnace.
7. It has remote control operation, remote malfunction diagnosis and remote program update functions.

Optional Configuration of Pressure Sinter Furnace
1.Furnace door: Hinge turning type, auto lock-ring tight
2. Furnace vessel: All carbon steel/Inner layer stainless steel/Total stainless steel
3. Furnace hot zone: all hard composite felt /Hard composite carbon felt +CFC
4.Heater material: isostatic press graphite
5. Muffle material: fine size graphite
6. Process gas control: Volume/mass flow-meter, manual value/auto value, Foreign brand/Chinese brand
7. Vacuum pump and gauge: Foreign brand/Chinese brand
8. Load truck: roller type/fork type
9. Panel operasi: skrin simulasi / skrin sentuh / komputer industri
10. PLC: OMRON / Siemens
11. Pengawal suhu: SHIMADEN / EUROTHERM 
12. Thermocouple: C type(tungsten sheath/Moly sheath/ceramic sheath)
13. Perakam: Perakam tanpa kertas / perakam kertas, Jenama asing / jenama Cina
14. Komponen elektrik: CHINT / Schneider / Siemens

Specifications of Pressure Furnace


Model SpecPSF-040408PSF-050513
Working Zone Size (W×H×L)(mm)400 × 400 × 800500 × 500 × 1300
Max. Weight (kg) (not mean actual load weight)250500
Suhu maksimum (° C)15501550
Temperature uniformity under vacuum (°C)± 5± 5
Temperature uniformity under pressure (°C)± 10± 10
Heating power of Pressure sinter-hip furnace (kW)150300
Ultimate Vacuum (Pa)22
Kadar Peningkatan Tekanan (Pa / j)0.670.67
Working pressure(MPa)1 / 21 / 2
Process gas (bar)Ar / N2/H2Ar / N2/H2
The above specifications are defined according to cemented carbide part. The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements.
INQUIRY

Produk Berkaitan


Lokasi
ACME Xingsha Industrial Park, East Liangtang Rd. , Bandar Changsha, Hunan
Telefon
+ 86-151 7315 3690( Mudah Alih Jessie)
E-Mail
luar negara@sinoacme.cn
Tentang Kami

Diasaskan pada tahun 1999, ACME (Perbadanan Lanjutan untuk Bahan & Peralatan) terletak di Taman Perindustrian Xingsha, dengan keluasan 100,000 m2. ACME ialah perusahaan berteknologi tinggi khusus dalam pembuatan peralatan pemanasan industri untuk bahan dan tenaga baharu.

Hubungi kami