MENU

Laman Utama>Produk>Peralatan Pemanas Industri Komposit C & SiC

Hubungi Kami

+86-151 7315 3690( Mudah Alih Jessie)

luar negara@sinoacme.cn

ACME Xingsha Industrial Park, East Liangtang Rd. , Bandar Changsha, Hunan

Vacuum Debinding and Sintering Furnace(SiC/Si3N4/AlN)

Vacuum Debinding and Sintering Furnace(SiC/Si3N4/AlN)

The furnace is used forreaction sintering, low pressure sintering, re-crystal sintering of carbide, nitride, oxide ceramic embryo and products. The degreasing system is optional to realize the one-time degreasing and sintering treatment of ceramic products.

INQUIRY
  • Ciri-ciri teknikal
  • Konfigurasi pilihan yang berkaitan

Deskripsi
The furnace is used for  reaction sintering, low pressure sintering, re-crystal sintering of carbide, nitride, oxide ceramic embryo and products. The degreasing system is optional to realize the one-time degreasing and sintering treatment of ceramic products.

Application: Ceramic products such as SiC, silicon nitride and aluminum nitride.

Specifications of Vacuum Debinding and Sintering Furnace

ModelSpec

Working Zone Size

(W×H×L) (mm)

Max. Temperature (°C)Keseragaman Suhu (° C)Vakum Muktamad (Pa)Kadar Peningkatan Tekanan (Pa / j)
VDSF-050511500 500 × × 11001500 / 2400±5/± 101-1000.67
VDSF-1006121000 600 × × 12001500 / 2400±5/± 101-1000.67
VDSF-1008131000 800 × × 13001500 / 2400±5/± 101-1000.67
VDSF-1008251000 800 × × 25001500 / 2400±5/± 101-1000.67
VDSF-1008401000 800 × × 40001500 / 2400±5/± 101-1000.67
The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements.


Ciri-ciri teknikal

1.Using unique ACME super high temperature and high current power supply technology, it can long term stable use at high temperature;

2.Using special designed high temperature pyro-meter measuring technology with precision temperature control and small deviation;

3.Installed with special sealing muffle to minimize the silicon vapor and exhaust gas contamination to the heating element and insulation;

4.Installed high efficiency exhaust gas treatment device , which is environment-friendly and convenient to clean;

5.It has debinding system, to complete debinding and sintering process in one furnace at one time.

Optional Configuration of Vacuum Sintering Furnace

1.Furnace door: screw/hydraulic/manual elevation; manual tight/auto lock-ring tight

2.Furnace vessel: all carbon steel/inner layer stainless steel/all stainless steel

3.Furnace hot zone: soft carbon felt/soft graphite felt/rigid composite board/CFC

4.Heating element and muffle: isostatic press graphite/high purity, strength and density graphite/fine size graphite

5.Process gas system: volume/mass flow-meter; manual/auto valve;

6.Thermocouple: C type/S type/R type/B type

7.Pyro-meter:Dual-color/Single color; CHINO/Raytek


INQUIRY

Produk Berkaitan


Lokasi
ACME Xingsha Industrial Park, East Liangtang Rd. , Bandar Changsha, Hunan
Telefon
+ 86-151 7315 3690( Mudah Alih Jessie)
E-Mail
luar negara@sinoacme.cn
Tentang Kami

Diasaskan pada tahun 1999, ACME (Perbadanan Lanjutan untuk Bahan & Peralatan) terletak di Taman Perindustrian Xingsha, dengan keluasan 100,000 m2. ACME ialah perusahaan berteknologi tinggi khusus dalam pembuatan peralatan pemanasan industri untuk bahan dan tenaga baharu. dasar privasi | Terma dan Syarat

Hubungi kami