MENU

Laman Utama>Produk>Peralatan Pemanas Industri Komposit C & SiC

Hubungi Kami

+86-151 7315 3690( Mudah Alih Jessie)

luar negara@sinoacme.cn

ACME Xingsha Industrial Park, East Liangtang Rd. , Bandar Changsha, Hunan

Relau PRE-pengoksidaan berterusan

Relau PRE-pengoksidaan berterusan

Furnace is used for continuous pre-oxidation treatment under controlled atmosphere of PAN based, asphalt based, viscose based carbon fiber and its felt material.

INQUIRY
  • Ciri-ciri teknikal
  • Konfigurasi pilihan yang berkaitan

Deskripsi

Furnace is used for continuous pre-oxidation treatment under controlled atmosphere of PAN based, asphalt based, viscose based carbon fiber and its felt material.

Specifications of Pusher Type Purification Furnace

ModelSpec

LOF-220

LOF-420

LOF-1300LOF-1800
Lebar Belt20040011001600
Furnace Hearth Width22042013001800
Pre-oxidation Temperature(℃)150-300150-300150-300150-300
Section Temperature uniformity(℃)Cross-section:±2℃
Pre-oxidation AtmosphereAir/N2
Gas Speed0.5-3 Nm/s(Adjustable)
The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements.

Ciri-ciri teknikal

1.Using special hot air circulation and air distribution structure, the temperature uniformity is ≤±1.5℃/m, air flow uniformity is ≤±20%;

2.Using module section manufacture technology, it can connect together freely in accordance with the production capacity;

3.It can be designed multi-layer structure to reduce the floor space requires;

4.Using auto material feeding and rolling discharge device, operate easily.

 

Optional Configuration of Continuous Pre-oxidation Furnace

1.Furnace structure: single layer/multi-layer

2.Hot air circulation type: top and bottom/left and right/inlet from the rear end top, return from the entrance end side

3.Hot air distribution: concentration heating, evenly distribution/separate heating, evenly distribution

4.HMI: simulation screen/touch screen/industrial compute

5.PLC: OMRON/Siemens

6.Temperature controller:  SHIMADEN/  Eurotherm

7.Temperature measuring: thermocouple/ thermo-meter

INQUIRY

Produk Berkaitan


Lokasi
ACME Xingsha Industrial Park, East Liangtang Rd. , Bandar Changsha, Hunan
Telefon
+ 86-151 7315 3690( Mudah Alih Jessie)
E-Mail
luar negara@sinoacme.cn
WhatsApp
+86 151 1643 6885
Tentang Kami

Diasaskan pada tahun 1999, ACME (Perbadanan Lanjutan untuk Bahan & Peralatan) terletak di Taman Perindustrian Xingsha, dengan keluasan 100,000 m2. ACME ialah perusahaan berteknologi tinggi khusus dalam pembuatan peralatan pemanasan industri untuk bahan dan tenaga baharu.dasar privasi | Terma dan Syarat

Hubungi kami
Perbadanan Lanjutan untuk Bahan & Peralatan| Peta Laman