klasifikacija
Kontaktai
+86-151 7315 3690 (Jessie Mobile)
ACME Xingsha pramonės parkas, East Liangtang Rd. , Changsha City, Hunan
Nepertraukiamo sukepinimo krosnis
It is used for continous sintering of ceramic products, ceramic powder materials and fibers.
- Techninės savybės
- Susijusi pasirenkama konfigūracija
Aprašymas
It is used for continous sintering of ceramic products, ceramic powder materials and fibers.
Naudojimas:Ceramic products such as SiC, Si3N4 and AlN.
Specifications of Continuous Sinter Furnace
ModelSpec | Darbo zonos dydis (D × H ) (mm) | Maks. Temperatūra (°C) | Sekcijos temperatūros vienodumas (°C) | Procesinės dujos |
CSF-0202 | 200 × 200 | 1700/1900/2400 | ± 5/±7.5 | Oras/N2/Ar/H2 |
CSF-0303 | 300 × 300 | 1700/1900/2400 | ± 5/± 7.5 | Air/N2/Ar/H2 |
CSF-0404 | 400 × 400 | 1700/1900/2400 | ± 5/± 7.5 | Air/N2/Ar/H2 |
Aukščiau pateikti parametrai gali būti koreguojami pagal proceso reikalavimus, jie nėra priimtinumo standartai, detalių specifikacija. bus nurodyta techniniame pasiūlyme ir sutartyse. |
Techninės savybės
1.To use newly develop high temperature heating technology, with high temperature and long service life;
2.Load and unload continuously, good sealing performance and low gas consumption;
3.It can be used for continuous sintering of ceramic part, and continuous sintering of powder material;
4.Automatic load, push, unload and discharge for powder, stable quality and less labor;
5.Furnace hot zone length can be customized design.
Optional Configuration of Continuous Sinter Furnace
1.Insulation material: graphite felt/carbon felt/ceramic fiber felt/graphite brick/ceramic brick
2.Heating element: C/C composite/ graphite/ metal/ SiC
3.Muffle: C/C composite/ graphite/ ceramic/ metal
4.Process gas system: volume flow-meter
5.Thermocouple: C type/S type/K type/N type
6.Pyro-meter:Dual-color/Single color; CHINO/Raytek