MENU

ໜ້າ ທຳ ອິດ>ຜະລິດຕະພັນ>C & SiC ປະກອບອຸປະກອນເຮັດຄວາມຮ້ອນອຸດສາຫະ ກຳ

ຕິດ​ຕໍ່​ພວກ​ເຮົາ

+ 86-13469050805 (Leo Mobile)

[email protected]|[email protected]

ສວນອຸດສາຫະ ກຳ ACME Xingsha, East Liangtang Rd. , ເມືອງ Changsha, Hunan | 220012, Minsk, ul. Kalinin 7B

ເຕົາ CVD (SiC、 BN)

ເຕົາ CVD (SiC、 BN)

Furnace used for anti-oxidation coating, matrix material character change and etc. by using Silicohydride gas source. It has both horizontal and vertical structures.
ການສອບຖາມ

ສອບຖາມຂໍ້ມູນ
  • ຄຸນລັກສະນະທາງວິຊາການ
  • ການຕັ້ງຄ່າທາງເລືອກທີ່ກ່ຽວຂ້ອງ

ລາຍລະອຽດ
Furnace used for anti-oxidation coating, matrix material character change and etc. by using Silicohydride gas source. It has both horizontal and vertical structures.

ຄໍາຮ້ອງສະຫມັກ: SiC coating for C/C composite material, SiC coating for graphite, SiC,  BN and ZrC coating for fiber and etc.

ຄຸນລັກສະນະທາງວິຊາການ
1. Using the most advanced control technology, it can precise control the MTS flow and pressure, the deposition flow is stable and pressure fluctuate in narrow range;

2. Special designed deposition chamber with good sealing effect and great anti-contamination performance;

3. Using multiple deposition channels with uniformity gas flow, without deposition dead corner and perfect deposition surface;

4. It has treatment for the high corrosive gas, flammable and explosive gas , solid dust and low melting point sticky materials during the deposition process;

5. Using newly designed corrosion resistant vacuum pump which has long continuous working hours and low maintenance rate.

ການຕັ້ງຄ່າທາງເລືອກຂອງເຕົາປະຢັດ CVD

1. Furnace door: screw/hydraulic/manual elevation type;swing opening/parallel opening(large size furnace door); manual tight/ auto lock-ring tight

2. Furnace vessel: all carbon steel/inner layer stainless steel/all stainless steel

3. Furnace hot zone: soft carbon felt/soft graphite felt/rigid composite felt/CFC

4. Heating element and muffle: isostatic press graphite/high purity, strength and density graphite/fine size graphite

5. Process gas system: volume/mass flow-meter

6.Thermocouple: K type/N type/C type/S type

ຂໍ້ມູນສະເພາະຂອງ CVD ເຕົາ


ModelSpec

ຂະ ໜາດ ເຂດເຮັດວຽກ

 (W × H × L) (ມມ)

ສູງສຸດທີ່ເຄຍ. ອຸນຫະພູມ (° C)ຄວາມເປັນເອກະພາບດ້ານອຸນຫະພູມ (° C)ສູນຍາກາດສູງສຸດ (Pa)ອັດຕາການເພີ່ມຄວາມກົດດັນ (Pa / h)
HCVD-060609-SiC600 600 × 9001500± 7.51​, 1000.67
HCVD-101015-SiC1000 1000 × 15001500± 7.51​, 1000.67
HCVD-121220-SiC1200 × 1200 × 20001500± 101​, 1000.67
HCVD-151530-SiC1500 × 1500 × 30001500± 101​, 1000.67
HCVD-252035-SiC
2500 × 2000 × 35001500± 101​, 1000.67

VCVD-0305-SiCφ300× 5001500± 51​, 1000.67
VCVD-0608-SiCφ600× 8001500± 7.51​, 1000.67
VCVD-0812-SiCφ800× 12001500± 7.51​, 1000.67
VCVD-1120-SiCφ1100× 20001500± 101​, 1000.67
VCVD-2632-SiCφ2600× 32001500± 101​, 1000.67
ຕົວກໍານົດການຂ້າງເທິງນີ້ສາມາດປັບຕາມຄວາມຕ້ອງການຂອງຂະບວນການ, ມັນບໍ່ແມ່ນມາດຕະຖານການຍອມຮັບ, ຂໍ້ມູນລະອຽດ. ຈະຖືກລະບຸໄວ້ໃນຂໍ້ສະ ເໜີ ເຕັກນິກແລະຂໍ້ຕົກລົງ.
ສອບຖາມຂໍ້ມູນ

ຜະ​ລິດ​ຕະ​ພັນ​ທີ່​ກ່ຽວ​ຂ້ອງ


ສະ​ຖານ​ທີ່
ສວນອຸດສາຫະ ກຳ ACME Xingsha, East Liangtang Rd. , ເມືອງ Changsha, Hunan | 220012, Minsk, ul. Kalinin 7B
ໂທລະ​ສັບ
+ 86-13469050805 (Leo Mobile)
E-Mail
[email protected]
ກ່ຽວກັບພວກເຮົາ

ສ້າງຕັ້ງຂື້ນໃນປີ 1999, ACME (Advanced Corporation for Material & Equipments) ຕັ້ງຢູ່ໃນເຂດອຸດສາຫະ ກຳ Muyun, ມີເນື້ອທີ່ 100,000 m2. ACME ແມ່ນວິສາຫະກິດເຕັກໂນໂລຢີສູງທີ່ຊ່ຽວຊານໃນການຜະລິດອຸປະກອນຄວາມຮ້ອນອຸດສາຫະ ກຳ ສຳ ລັບວັດສະດຸແລະພະລັງງານ ໃໝ່.

ຕິດ​ຕໍ່​ພວກ​ເຮົາ
ບໍລິສັດຂັ້ນສູງ ສຳ ລັບວັດສະດຸແລະອຸປະກອນ| ແຜນຜັງເວັບໄຊທ໌້