ການຈັດປະເພດ
ຕິດຕໍ່ພວກເຮົາ
+86-151 7315 3690(Jessie Mobile)
ACME Xingsha Industrial Park, East Liangtang Rd. , ເມືອງຊາງຊ່າ, ແຂວງຫູນານ
ເຕົາເຜົາ Sinter ຢ່າງຕໍ່ເນື່ອງ
It is used for continous sintering of ceramic products, ceramic powder materials and fibers.
- ຄຸນລັກສະນະທາງວິຊາການ
- ການຕັ້ງຄ່າທາງເລືອກທີ່ກ່ຽວຂ້ອງ
ລາຍລະອຽດ
It is used for continous sintering of ceramic products, ceramic powder materials and fibers.
ຄໍາຮ້ອງສະຫມັກ:Ceramic products such as SiC, Si3N4 and AlN.
Specifications of Continuous Sinter Furnace
| ModelSpec | ຂະໜາດພື້ນທີ່ເຮັດວຽກ (D × H ) (mm) | ສູງສຸດ. ອຸນຫະພູມ (°C) | Section Temperature Uniformity (°C) | ອາຍແກັສຂະບວນການ |
| CSF-0202 | 200 × 200 | 1700/1900/2400 | ± 5/ ± 7.5 | Air/N2/Ar/H2 |
| CSF-0303 | 300 × 300 | 1700/1900/2400 | ± 5/± 7.5 | Air/N2/Ar/H2 |
| CSF-0404 | 400 × 400 | 1700/1900/2400 | ± 5/± 7.5 | Air/N2/Ar/H2 |
| ຕົວກໍານົດການຂ້າງເທິງນີ້ສາມາດໄດ້ຮັບການປັບຕາມຄວາມຕ້ອງການຂະບວນການ, ພວກເຂົາເຈົ້າບໍ່ແມ່ນມາດຕະຖານການຍອມຮັບ, ລາຍລະອຽດ spec. ຈະຖືກລະບຸໄວ້ໃນຂໍ້ສະເຫນີດ້ານວິຊາການແລະຂໍ້ຕົກລົງ. | ||||
ຄຸນລັກສະນະທາງວິຊາການ
1.To use newly develop high temperature heating technology, with high temperature and long service life;
2.Load and unload continuously, good sealing performance and low gas consumption;
3.It can be used for continuous sintering of ceramic part, and continuous sintering of powder material;
4.Automatic load, push, unload and discharge for powder, stable quality and less labor;
5.Furnace hot zone length can be customized design.
Optional Configuration of Continuous Sinter Furnace
1.Insulation material: graphite felt/carbon felt/ceramic fiber felt/graphite brick/ceramic brick
2.Heating element: C/C composite/ graphite/ metal/ SiC
3.Muffle: C/C composite/ graphite/ ceramic/ metal
4.Process gas system: volume flow-meter
5.Thermocouple: C type/S type/K type/N type
6.Pyro-meter：Dual-color/Single color; CHINO/Raytek
