мЕНЮ

Башкы бет>Products>Atomization порошок өндүрүү жабдуулары

Байланыш

+ 86-13469050805 (Leo Mobile)

[электрондук почта корголгон]|[электрондук почта корголгон]

ACME Xingsha өнөр жай паркы, Чыгыш Лянтанг Rd. , Чанша Сити, Хунан | 220012, Минск, ул. Калинин 7Б

Gas Atomization Powder Production Equipment

Gas Atomization Powder Production Equipment

The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.

СУРОО-ТАЛАП
  • Техникалык мүнөздөмөлөрү
  • Тектеш кошумча конфигурация

1. Кыскача киришүү
The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.


2. Equipment Features

  • Can produce most of the metal and alloy powders at low cost.

  • The metal powder is sub-spherical or irregular;

  • The metal melt solidifies quickly without segregation;

  • The particle size distribution of the powder can be controlled through appropriate process adjustment.


3. Негизги техникалык мүнөздөмө

модельACME/GA-10ACME/GA-50

ACME

/GA-100

ACME/

GA-200

ACME/

GA-300

Melting temperature(℃)1750
Кубат түрүAC/380V/50Hz

жөндөмдүүлүгү

(Кг)

1050100200300

Melting furnace power

(kW)

50
100160250300
Tundish heating methodmedium frequency induction / resistance heating
Tundish power(kW)15-45
Температураны өлчөөInfrared temperature measurement/W/Re 5/26
Gas flowL/min)8000-30000
муздатуу ыкмасыCooling tower / water cooling unit + heat exchanger


4. Configuration selection

  • Medium Frequency power supply: IGBT;KGPS

  • HMI: Analog screen; computer touch screen

  • Control method: Industrial computer, PLC

  • Other components:  High-quality Chinese brand; Foreign brand

  • it can also be adjusted according to different technical requirements to do customized design

1. Кыскача киришүү
The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.


2. Equipment Features

  • Can produce most of the metal and alloy powders at low cost.

  • The metal powder is sub-spherical or irregular;

  • The metal melt solidifies quickly without segregation;

  • The particle size distribution of the powder can be controlled through appropriate process adjustment.


3. Негизги техникалык мүнөздөмө

модельACME/GA-10ACME/GA-50

ACME

/GA-100

ACME/

GA-200

ACME/

GA-300

Melting temperature(℃)1750
Кубат түрүAC/380V/50Hz

жөндөмдүүлүгү

(Кг)

1050100200300

Melting furnace power

(kW)

50
100160250300
Tundish heating methodmedium frequency induction / resistance heating
Tundish power(kW)15-45
Температураны өлчөөInfrared temperature measurement/W/Re 5/26
Gas flowL/min)8000-30000
муздатуу ыкмасыCooling tower / water cooling unit + heat exchanger


4. Configuration selection

  • Medium Frequency power supply: IGBT;KGPS

  • HMI: Analog screen; computer touch screen

  • Control method: Industrial computer, PLC

  • Other components:  High-quality Chinese brand; Foreign brand

  • it can also be adjusted according to different technical requirements to do customized design


СУРОО-ТАЛАП

Related Products


орду
ACME Xingsha өнөр жай паркы, Чыгыш Лянтанг Rd. , Чанша Сити, Хунан | 220012, Минск, ул. Калинин 7Б
Phone
+ 86-13469050805 (Leo Mobile)
E-Mail
[электрондук почта корголгон]
Биз жөнүндө

1999-жылы негизделген ACME (Advanced Corporation for Materials & Equipment) Мүйүн өнөр жай аймагында жайгашкан, аянты 100,000 м2. ACME - бул жаңы материал жана энергия үчүн жылытуучу жабдууларды чыгарууга адистешкен жогорку технологиялуу ишкана.

Биз менен байланыш
Материалдар жана шаймандар үчүн өнүккөн корпорация| Сайттын картасы