ចំណាត់ថ្នាក់
ទំនាក់ទំនងមកយើងខ្ញុំ
+86-151 7315 3690(Jessie Mobile)
ACME Xingsha Industrial Park, East Liangtang Rd. ទីក្រុង Changsha ខេត្ត Hunan
C-C / Carbon-ceramic Brake Disc Preparation Equipment
This furnace is mainly used for the production of high performance brake disc used in Automobile, Bullet train, Tank, Aircraft and etc.
- លក្ខណៈបច្ចេកទេស
- Related optional configuration
ការពិពណ៌នា
This furnace is mainly used for the production of high performance brake disc used in Automobile, Bullet train, Tank, Aircraft and etc.
Technology process:
1.Carbon fiber preform → high temperature treatment → pressure infiltration → carbonization → machining → graphitization → ceramization → subsequent process
2.Carbon fiber preform → high temperature treatment → CVD → machining → graphitization → ceramization → subsequent process
| C-C / Carbon-ceramic Brake Disc Preparation Equipment | ||||||
| ប្រភេទឧបករណ៍ | Chemical vapor deposition furnace | Vacuum graphitization furnace | ||||
| Spec/Model | VCVD-0610-C | VCVD-1120-C | HCVD-121220-C | VIG-0610-C | VIG-1120-C | HVG-131320-C |
| Working Zone Size (W × H × L) (mm) | 600២២០ × ៣៥០ | 1100២២០ × ៣៥០ | 1200 × 1200 × 2000 | 600២២០ × ៣៥០ | 1100២២០ × ៣៥០ | 1300 × 1300 × 2000 |
| Max. Temperature (°C) | 1200 | 1200 | 1200 | 2600 | 2600 | 2600 |
| Temperature Uniformity (°C) | ± 5 | ± 7.5 | ± 15 | ± 15 | ± 20 | ± 15 |
| Ultimate Vacuum (Pa) | 50 | 50 | 50 | 50 | 50 | 50 |
| ប្រភេទឧបករណ៍ | Siliconizing furnace | Vacuum carbonization furnace | Vacuum pressure Infiltration furnace | ||||
| Spec/Mode | ISII-0610 | ISII-1120 | VSII-121220 | VVC-0608 | VVC-1120 | VPI-0608 | VPI-1120 |
| Usable Space (W × H × L) (mm) | 600២២០ × ៣៥០ | 1100២២០ × ៣៥០ | 1200 × 1200 × 2000 | 600២២០ × ៣៥០ | 1000២២០ × ៣៥០ | 600២២០ × ៣៥០ | Φ1000× 2000 |
| Max. Temperature (°C) | 2000 | 2000 | 2000 | 1000 | 1000 | 400 | 400 |
| Temperature Uniformity (°C) | ± 15 | ± 20 | ± 15 | ± 10 | ± 10 | ± 10 | ± 10 |
| Ultimate Vacuum (Pa) | 50 | 50 | 50 | 50 | 50 | 50 | 50 |
| Max. Pressure (MPa) | / | / | / | / | / | 5 | 5 |
| The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements. | |||||||
Optional Configuration of C-C / Carbon-ceramic Brake Disc Preparation Equipment
1.Furnace door: screw/hydraulic/manual elevation; manual tight/ auto lock-ring tight
2.Furnace vessel: all carbon steel/inner layer stainless steel/all stainless steel/Q345
3.Furnace hot zone: soft carbon felt/soft graphite felt/rigid composite board/Refractory brick+ceramic fiber /CFC
4.Heating element : isostatic press graphite/high purity, strength and density graphite/Ni-Cr; Fe-Cr-Nb
5.Muffle: press high purity, high purity, strength and density graphite/fine size graphite/SUS310S
6. Process gas system: volume/mass flow-meter
7.Thermocouple: C type/ S type/ K type/ N type
8.Pyro-meter: Single color/Dual-color; CHINO/Raytek
