ចំណាត់ថ្នាក់
ទំនាក់ទំនងមកយើងខ្ញុំ
+86-151 7315 3690(Jessie Mobile)
ACME Xingsha Industrial Park, East Liangtang Rd. ទីក្រុង Changsha ខេត្ត Hunan
ឧបករណ៍ផលិតម្សៅអាតូមិចឧស្ម័ន
The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.
- លក្ខណៈបច្ចេកទេស
- ការកំណត់រចនាសម្ព័ន្ធស្រេចចិត្តដែលពាក់ព័ន្ធ
ការណែនាំសង្ខេប
The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.
2. Equipment Features
Can produce most of the metal and alloy powders at low cost.
The metal powder is sub-spherical or irregular;
The metal melt solidifies quickly without segregation;
The particle size distribution of the powder can be controlled through appropriate process adjustment.
3. ការបញ្ជាក់បច្ចេកទេសចម្បង
| សារីុ | ACME/GA-10 | ACME/GA-50 | អេស៊ីអេម /GA-100 | ACME/ GA-200 | ACME/ GA-300 |
| Melting temperature（℃） | 1750 | ||||
| ប្រភេទថាមពល | AC/380V/50Hz | ||||
សមត្ថភាព (គក) | 10 | 50 | 100 | 200 | 300 |
Melting furnace power （kW） | 50 | 100 | 160 | 250 | 300 |
| Tundish heating method | medium frequency induction / resistance heating | ||||
| Tundish power（kW） | 15-45 | ||||
| វាស់សីតុណ្ហភាព | Infrared temperature measurement/W/Re 5/26 | ||||
| Gas flowL/min） | 8000-30000 | ||||
| វិធីសាស្ដ្រត្រជាក់ | Cooling tower / water cooling unit + heat exchanger | ||||
4. ការជ្រើសរើសការកំណត់រចនាសម្ព័ន្ធ
Medium Frequency power supply: IGBT；KGPS
HMI: Analog screen; computer touch screen
Control method: Industrial computer， PLC
Other components: High-quality Chinese brand; Foreign brand
it can also be adjusted according to different technical requirements to do customized design
ការណែនាំសង្ខេប
The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.
2. Equipment Features
Can produce most of the metal and alloy powders at low cost.
The metal powder is sub-spherical or irregular;
The metal melt solidifies quickly without segregation;
The particle size distribution of the powder can be controlled through appropriate process adjustment.
3. Configuration selection
Medium Frequency power supply: IGBT；KGPS
HMI: Analog screen; computer touch screen
Control method: Industrial computer， PLC
Other components: High-quality Chinese brand; Foreign brand
it can also be adjusted according to different technical requirements to do customized design
