IZBORNIK

Početna>Proizvodi>C&SiC kompoziti Industrijska oprema za grijanje

Kontaktirajte Nas

+86-151 7315 3690 (Jessie Mobile)

overseas@sinoacme.cn

Industrijski park ACME Xingsha, East Liangtang Rd. , grad Changsha, Hunan

Peć za vakuumsko uklanjanje veziva i sinteriranje (SiC/Si3N4/AlN)

Peć za vakuumsko uklanjanje veziva i sinteriranje (SiC/Si3N4/AlN)

The furnace is used forreaction sintering, low pressure sintering, re-crystal sintering of carbide, nitride, oxide ceramic embryo and products. The degreasing system is optional to realize the one-time degreasing and sintering treatment of ceramic products.

UPIT
  • Tehničke značajke
  • Povezana izborna konfiguracija

Opis
The furnace is used for  reaction sintering, low pressure sintering, re-crystal sintering of carbide, nitride, oxide ceramic embryo and products. The degreasing system is optional to realize the one-time degreasing and sintering treatment of ceramic products.

Application: Ceramic products such as SiC, silicon nitride and aluminum nitride.

Specifications of Vacuum Debinding and Peć za sinterovanje

ModelSpec

Veličina radne zone

(Š×V×D) (mm)

Maks. Temperatura (°C)Ujednačenost temperature (°C)Krajnji vakuum (Pa)Stopa porasta tlaka (Pa/h)
VDSF-050511500 × × 500 11001500/2400±5/± 101-1000.67
VDSF-1006121000 × × 600 12001500/2400±5/± 101-1000.67
VDSF-1008131000 × × 800 13001500/2400±5/± 101-1000.67
VDSF-1008251000 × × 800 25001500/2400±5/± 101-1000.67
VDSF-1008401000 × × 800 40001500/2400±5/± 101-1000.67
Gore navedeni parametri mogu se prilagoditi zahtjevima procesa, oni nisu prihvatljivi standard, detaljna specifikacija. bit će navedeno u tehničkoj ponudi i dogovorima.


Tehničke značajke

1.Using unique ACME super high temperature and high current power supply technology, it can long term stable use at high temperature;

2. Korištenje posebno dizajnirane tehnologije mjerenja pirometra visoke temperature s preciznom kontrolom temperature i malim odstupanjem;

3.Installed with special sealing muffle to minimize the silicon vapor and exhaust gas contamination to the heating element and insulation;

4.Installed high efficiency exhaust gas treatment device , which is environment-friendly and convenient to clean;

5.It has debinding system, to complete debinding and sintering process in one furnace at one time.

Optional Configuration of Vacuum Sintering Furnace

1.Furnace door: screw/hydraulic/manual elevation; manual tight/auto lock-ring tight

2. Posuda za peć: potpuno ugljični čelik/unutarnji sloj nehrđajući čelik/sasvim nehrđajući čelik

3.Furnace hot zone: soft carbon felt/soft graphite felt/rigid composite board/CFC

4.Grijaći element i prigušnica: izostatski prešani grafit/grafit visoke čistoće, čvrstoće i gustoće/grafit fine veličine

5.Process gas system: volume/mass flow-meter; manual/auto valve;

6.Thermocouple: C type/S type/R type/B type

7.Pyro-meter:Dual-color/Single color; CHINO/Raytek


UPIT

Srodni proizvodi


Lokacija
Industrijski park ACME Xingsha, East Liangtang Rd. , grad Changsha, Hunan
Telefon
+ 86-151 7315 3690(Jessie Mobile)
E-mail
overseas@sinoacme.cn
Što ima
+ 86 151 1643 6885
O Nama

Osnovan 1999. godine, ACME (Advanced Corporation for Materials & Equipments) nalazi se u industrijskom parku Xingsha, na površini od 100,000 m2. ACME je visokotehnološko poduzeće specijalizirano za proizvodnju industrijske opreme za grijanje novih materijala i energije.Izjava o privatnosti | Uvjeti

Kontaktirajte nas
Napredna korporacija za materijale i opremu| Sitemap