IZBORNIK

Početna>Proizvodi>C&SiC kompoziti Industrijska oprema za grijanje

Kontaktirajte Nas

+86-151 7315 3690 (Jessie Mobile)

overseas@sinoacme.cn

Industrijski park ACME Xingsha, East Liangtang Rd. , grad Changsha, Hunan

Plinska peć za sinterovanje

Plinska peć za sinterovanje

It is used for vacuum sintering and pressure sintering of ceramic products. It has both horizontal and vertical structures. Debinding is an option function.

UPIT
  • Tehničke značajke
  • Povezana izborna konfiguracija

Opis
It is used for vacuum sintering and pressure sintering of ceramic products. It has both horizontal and vertical structures. Debinding is an option function.

Primjena:Ceramic part such as SiC, Si3N4, B4C, AlN and etc.

Specifications of Vacuum Sintering Furnace

ModelSpec

Veličina radne zone

(W×H×L) (mm)

Maks. Temperatura (°C)Ujednačenost temperature (°C)Krajnji vakuum (Pa)Max. Pressure (MPa)
HPSF-4412400 × × 400 12001500-2000±5/± 101-10010
HPSF-5512500 × × 500 12001500-2000±5/± 101-10010
HPSF-5518500 × × 500 18001500-2000±5/± 101-10010

VPSF-0203φ200 × 3001500-2000±5/± 101-10010
VPSF-0308φ300 × 8001500-2000±5/± 101-10010
VPSF-0612φ600 × 12001500-2000±5/± 101-10010
VPSF-0716φ700 × 16001500-2000±5/± 101-10010
VPSF-0815φ800 × 15001500-2000±5/± 101-10010
VPSF-0917φ900 × 17001500-2000±5/± 101-10010
Gore navedeni parametri mogu se prilagoditi zahtjevima procesa, oni nisu prihvatljivi standard, detaljna specifikacija. bit će navedeno u tehničkoj ponudi i dogovorima.

Tehničke značajke

1.The furnace uses special hot zone structure and heating element design, good  temperature uniformity;

2.Using special designed debinding muffle which has good sealing, complete binder removing and no contamination to inside components features;

3.It has functions of vacuum sintering, pressure sintering, negative pressure debinding and etc;

4.It has over temperature and over pressure mal-function alarm, mechanical automatic pressure protection and interlocking, high safety protection;

5.It configured with debinding system to achieve debinding and sintering of ceramic products.


Optional Configuration of Gas Pressure Sinter Furnace

1.Furnace door: screw/hydraulic/manual elevation; manual tight/ auto lock-ring tight

2. Posuda za peć: potpuno ugljični čelik/unutarnji sloj nehrđajući čelik/sasvim nehrđajući čelik

3.Furnace hot zone: soft carbon felt/soft graphite felt/hard composite felt/CFC

4.Grijaći element i prigušnica: izostatski prešani grafit/grafit visoke čistoće, čvrstoće i gustoće/grafit fine veličine

5.Process gas system: volume/mass flow-meter

6.Thermocouple: K type/N type/C type/S type

UPIT

Srodni proizvodi


Lokacija
Industrijski park ACME Xingsha, East Liangtang Rd. , grad Changsha, Hunan
Telefon
+ 86-151 7315 3690(Jessie Mobile)
E-mail
overseas@sinoacme.cn
Što ima
+ 86 151 1643 6885
O Nama

Osnovan 1999. godine, ACME (Advanced Corporation for Materials & Equipments) nalazi se u industrijskom parku Xingsha, na površini od 100,000 m2. ACME je visokotehnološko poduzeće specijalizirano za proizvodnju industrijske opreme za grijanje novih materijala i energije.Izjava o privatnosti | Uvjeti

Kontaktirajte nas
Napredna korporacija za materijale i opremu| Sitemap