वर्गीकरण
संपर्क करें
+86-151 7315 3690 (जेसी मोबाइल)
एसीएमई जिंगशा इंडस्ट्रियल पार्क, ईस्ट लिआंगटांग रोड। , चांग्शा सिटी, हुनानो
सतत सिंटर भट्टी
It is used for continous sintering of ceramic products, ceramic powder materials and fibers.
- तकनीकी विशेषताएं
- संबंधित वैकल्पिक विन्यास
विवरण
It is used for continous sintering of ceramic products, ceramic powder materials and fibers.
आवेदन:Ceramic products such as SiC, Si3N4 and AlN.
Specifications of Continuous Sinter Furnace
मॉडलस्पेक | कार्य क्षेत्र का आकार (D × H ) (mm) | अधिकतम. तापमान (डिग्री सेल्सियस) | Section Temperature Uniformity (°C) | गैस प्रक्रिया करें |
सीएसएफ-0202 | 200 × 200 | 1700/1900/2400 | ± 5/±7.5 | Air/N2/Ar/H2 |
सीएसएफ-0303 | 300 × 300 | 1700/1900/2400 | ± 5/± 7.5 | Air/N2/Ar/H2 |
सीएसएफ-0404 | 400 × 400 | 1700/1900/2400 | ± 5/± 7.5 | Air/N2/Ar/H2 |
उपरोक्त मापदंडों को प्रक्रिया आवश्यकताओं के अनुसार समायोजित किया जा सकता है, वे स्वीकृति मानक, विवरण विनिर्देश के रूप में नहीं हैं। तकनीकी प्रस्ताव और समझौतों में बताया जाएगा। |
तकनीकी विशेषताएं
1.To use newly develop high temperature heating technology, with high temperature and long service life;
2.Load and unload continuously, good sealing performance and low gas consumption;
3.It can be used for continuous sintering of ceramic part, and continuous sintering of powder material;
4.Automatic load, push, unload and discharge for powder, stable quality and less labor;
5.Furnace hot zone length can be customized design.
Optional Configuration of Continuous Sinter Furnace
1.Insulation material: graphite felt/carbon felt/ceramic fiber felt/graphite brick/ceramic brick
2.Heating element: C/C composite/ graphite/ metal/ SiC
3.Muffle: C/C composite/ graphite/ ceramic/ metal
4.Process gas system: volume flow-meter
5.Thermocouple: C type/S type/K type/N type
6.Pyro-meter:Dual-color/Single color; CHINO/Raytek