MENU

Accueil>Produits>C&SiC Composites Équipement de chauffage industriel

Contactez-Nous

+86-151 7315 3690 (Jessie Mobile)

outre-mer@sinoacme.cn

Parc industriel ACME Xingsha, East Liangtang Rd. , ville de Changsha, Hunan

Vacuum Debinding and Sintering Furnace(SiC/Si3N4/AlN)

Vacuum Debinding and Sintering Furnace(SiC/Si3N4/AlN)

The furnace is used forreaction sintering, low pressure sintering, re-crystal sintering of carbide, nitride, oxide ceramic embryo and products. The degreasing system is optional to realize the one-time degreasing and sintering treatment of ceramic products.

ENQUÊTE
  • Caractéristiques techniques
  • Configuration facultative connexe

Description
The furnace is used for  reaction sintering, low pressure sintering, re-crystal sintering of carbide, nitride, oxide ceramic embryo and products. The degreasing system is optional to realize the one-time degreasing and sintering treatment of ceramic products.

Application: Ceramic products such as SiC, silicon nitride and aluminum nitride.

Specifications of Vacuum Debinding and Sintering Furnace

Spécification du modèle

Taille de la zone de travail

(W×H×L) (mm)

Max. Température (°C)Uniformité de température (°C)Vide ultime (Pa)Taux d'augmentation de la pression (Pa/h)
VDSF-050511500 × 500 × 11001500/2400± 5 /± 101-1000.67
VDSF-1006121000 × 600 × 12001500/2400± 5 /± 101-1000.67
VDSF-1008131000 × 800 × 13001500/2400± 5 /± 101-1000.67
VDSF-1008251000 × 800 × 25001500/2400± 5 /± 101-1000.67
VDSF-1008401000 × 800 × 40001500/2400± 5 /± 101-1000.67
Les paramètres ci-dessus peuvent être ajustés aux exigences du processus, ils ne sont pas en tant que norme d'acceptation, les spécifications détaillées. seront indiqués dans la proposition technique et les accords.


Caractéristiques techniques

1.Using unique ACME super high temperature and high current power supply technology, it can long term stable use at high temperature;

2.Using special designed high temperature pyro-meter measuring technology with precision temperature control and small deviation;

3.Installed with special sealing muffle to minimize the silicon vapor and exhaust gas contamination to the heating element and insulation;

4.Installed high efficiency exhaust gas treatment device , which is environment-friendly and convenient to clean;

5.It has debinding system, to complete debinding and sintering process in one furnace at one time.

Optional Configuration of Vacuum Sintering Furnace

1.Furnace door: screw/hydraulic/manual elevation; manual tight/auto lock-ring tight

2.Furnace vessel: all carbon steel/inner layer stainless steel/all stainless steel

3.Furnace hot zone: soft carbon felt/soft graphite felt/rigid composite board/CFC

4.Heating element and muffle: isostatic press graphite/high purity, strength and density graphite/fine size graphite

5.Process gas system: volume/mass flow-meter; manual/auto valve;

6.Thermocouple: C type/S type/R type/B type

7.Pyro-meter:Dual-color/Single color; CHINO/Raytek


ENQUÊTE

PRODUITS CONNEXES


Quartier
Parc industriel ACME Xingsha, East Liangtang Rd. , ville de Changsha, Hunan
Téléphone
+ 86-151 7315 3690(Jessy Mobile)
E-mail
outre-mer@sinoacme.cn
À propos de nous

Fondée en 1999, ACME (Advanced Corporation for Materials & Equipments) est située dans le parc industriel de Xingsha, avec une superficie de 100,000 2 mXNUMX. ACME est une entreprise de haute technologie spécialisée dans la fabrication d'équipements de chauffage industriels pour les nouveaux matériaux et énergies.
Politique de confidentialité | Conditions générales

Contactez-nous