MENU

Panimalay>Products>Powder Metallurgy Industrial Heating Equipment

Contact Us

+86-151 7315 3690( Jessie Mobile)

overseas@sinoacme.cn

ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan

Pressure Furnace

Pressure Furnace

Pressure furnace is used for cooper and tungsten alloy vacuum infiltration, and for vacuum sintering and pressure sintering of heavy alloy, moly alloy and cemented carbide.

INQUIRY
  • Mga Tampok sa Teknikal
  • Nalambigit nga opsyonal nga configuration

Description
Pressure furnace is used for cooper and tungsten alloy vacuum infiltration, and for vacuum sintering and pressure sintering of heavy alloy, moly alloy and cemented carbide.

Mga Tampok sa Teknikal
1. The furnace adopts special hot zone structure and heating element design, which features good temperature uniformity.
2. Espesyal nga gidisenyo debinding muffle gisagop uban sa maayo nga sealing ug bug-os nga pagbugkos removable, pagpugong sa sulod component polusyon. 
3.Pressure infiltration furnace has functions of slow vacuum, minor positive pressure sinter, partial pressure sinter, pressure sinter, minor negative pressure debinding and minor positive pressure debinding.
4. The Pressure Infiltration Furnace adopts advanced refractory structure and materials, which features good insulation performance and less heat absorption. It can save more than 20% energy compare to previous design. 
5. The touch screen operation and PLC central control are used to make the operation simple and reliable. 
6. Ang hudno adunay mga gimbuhaton nga sobra sa temperatura ug sobra sa presyur nga sayup nga alarma, mekanikal nga awtomatik nga proteksyon sa presyur ug interlocking, nga nahimong usa ka luwas nga hudno.
7. Kini adunay remote control operation, remote malfunction diagnosis ug remote program update functions.

Optional Configuration of Pressure Sinter Furnace
1.Furnace door: Hinge turning type, auto lock-ring tight
2. Ang sudlanan sa hudno: Tanan nga carbon steel / Inner layer stainless steel / Total stainless steel
3. Furnace hot zone: all hard composite felt /Hard composite carbon felt +CFC
4.Heater material: isostatic press graphite
5. Muffle material: fine size graphite
6. Pagkontrol sa proseso sa gas: Volume/mass flow-meter, manual value/auto value, Foreign brand/ Chinese brand
7. Vacuum pump ug gauge: Foreign brand/Chinese brand
8. Load truck: roller type / fork type
9. Operation panel: simulation screen/touch screen/industrial computer
10. PLC: OMRON/Siemens
11. Temperatura controller: SHIMADEN/EUROTHERM 
12. Thermocouple: C type(tungsten sheath/Moly sheath/ceramic sheath)
13. Recorder: Paperless recorder/paper recorder, Foreign brand/ Chinese brand
14. Mga sangkap sa kuryente: CHINT / Schneider / Siemens

Specifications of Pressure Furnace


SpecModelPSF-040408PSF-050513
Gidak-on sa Working Zone (W×H×L)(mm)400 × 400 × 800500 × 500 × 1300
Max. Timbang (kg) (dili nagpasabot sa aktuwal nga gibug-aton sa karga)250500
Max.temperatura (°C)15501550
Temperature uniformity under vacuum (°C)± 5± 5
Temperature uniformity under pressure (°C)± 10± 10
Heating power of Pressure sinter-hip furnace (kW)150300
Katapusan nga Vacuum (Pa)22
Presyo sa Pagtaas sa Rate (Pa/h)0.670.67
Working pressure(MPa)1 / 21 / 2
Process gas (bar)Ar/N2/H2Ar/N2/H2
The above specifications are defined according to cemented carbide part. The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements.
INQUIRY

May Kalabutan nga mga produkto


Location
ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan
Phone
+ 86-151 7315 3690( Jessie Mobile)
E-Mail
overseas@sinoacme.cn
Company

Gitukod kaniadtong 1999, ang ACME (Advanced Corporation for Materials & Equipments) nahimutang sa Xingsha Industrial Park, nga adunay gilapdon nga 100,000 m2. Ang ACME usa ka high-tech nga negosyo nga espesyalista sa paghimo sa mga kagamitan sa pagpainit sa industriya alang sa bag-ong materyal ug kusog.

Contact kanato