pagklasipikar
- Vacuum Heat Treatment Equipment
- Powder Metallurgy Industrial Heating Equipment
- C&SiC Composites Industrial Heating Equipment
- Atomization Powder Manufacturing Equipment
- Bag-ong Materyal
- Organic Solid Waste Thermal Pyrolysis Equipment
- Taas nga kaputli sa carbon nga materyal ug adunay sapaw nga graphite nga sangkap
Contact Us
+86-151 7315 3690( Jessie Mobile)
ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan
Padayon nga PRE-oxidation Furnace
Furnace is used for continuous pre-oxidation treatment under controlled atmosphere of PAN based, asphalt based, viscose based carbon fiber and its felt material.
- Mga Tampok sa Teknikal
- Nalambigit nga opsyonal nga configuration
Description
Furnace is used for continuous pre-oxidation treatment under controlled atmosphere of PAN based, asphalt based, viscose based carbon fiber and its felt material.
Specifications of Pusher Type Purification Furnace
| ModelSpec | LOF-220 | LOF-420 | LOF-1300 | LOF-1800 |
| Malapad nga Belt | 200 | 400 | 1100 | 1600 |
| Gilapdon sa Hurnohan | 220 | 420 | 1300 | 1800 |
| Pre-oxidation Temperature(℃) | 150-300 | 150-300 | 150-300 | 150-300 |
| Section Temperature uniformity(℃) | Cross-section:±2℃ | |||
| Pre-oxidation Atmosphere | Air/N2 | |||
| Gas Speed | 0.5-3 Nm/s(Adjustable) | |||
| Ang mga parameter sa ibabaw mahimong ipasibo sa mga kinahanglanon sa proseso, dili sila ingon nga sukaranan sa pagdawat, ang detalye sa detalye. ipahayag sa teknikal nga sugyot ug mga kasabutan. | ||||
Mga Tampok sa Teknikal
1.Using special hot air circulation and air distribution structure, the temperature uniformity is ≤±1.5℃/m, air flow uniformity is ≤±20%;
2.Using module section manufacture technology, it can connect together freely in accordance with the production capacity;
3.It can be designed multi-layer structure to reduce the floor space requires;
4.Using auto material feeding and rolling discharge device, operate easily.
Optional Configuration of Continuous Pre-oxidation Furnace
1.Furnace structure: single layer/multi-layer
2.Hot air circulation type: top and bottom/left and right/inlet from the rear end top, return from the entrance end side
3.Hot air distribution: concentration heating, evenly distribution/separate heating, evenly distribution
4.HMI: simulation screen/touch screen/industrial compute
5.PLC: OMRON/Siemens
6.Temperature controller: SHIMADEN/ Eurotherm
7.Temperature measuring: thermocouple/ thermo-meter
