MENU

Panimalay>Products>Atomization Powder Manufacturing Equipment

Contact Us

+86-151 7315 3690( Jessie Mobile)

overseas@sinoacme.cn

ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan

Gas Atomization Powder Production Equipment

Gas Atomization Powder Production Equipment

The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.

INQUIRY
  • Mga Tampok sa Teknikal
  • Nalambigit nga opsyonal nga configuration

1. Mubo nga Pasiuna
The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.


2. Equipment Features

  • Can produce most of the metal and alloy powders at low cost.

  • The metal powder is sub-spherical or irregular;

  • The metal melt solidifies quickly without segregation;

  • The particle size distribution of the powder can be controlled through appropriate process adjustment.


3. Panguna nga teknikal nga detalye

modeloACME/GA-10ACME/GA-50

acme

/GA-100

ACME/

GA-200

ACME/

GA-300

Melting temperature(℃)1750
Uri sa kuryenteAC/380V/50Hz

kapasidad

(Kg)

1050100200300

Melting furnace power

(kW)

50
100160250300
Tundish heating methodmedium frequency induction / resistance heating
Tundish power(kW)15-45
Pagsukod sa temperaturaInfrared temperature measurement/W/Re 5/26
Gas flowL/min)8000-30000
Ang paagi sa pagpabugnawCooling tower / water cooling unit + heat exchanger


4. Pagpili sa config

  • Medium Frequency power supply: IGBT;KGPS

  • HMI: Analog screen; computer touch screen

  • Control method: Industrial computer, PLC

  • Other components:  High-quality Chinese brand; Foreign brand

  • it can also be adjusted according to different technical requirements to do customized design

1. Mubo nga Pasiuna
The intermediate frequency melting furnace is placed in an appropriate place. The metal or alloy is melted and alloyed by intermediate frequency heating. The metal melt flows through the pre-heater and the guide tube to the spray plate, the high-pressure gas flows out the nozzle and breaks the metal melt into small drops. While the metal drops forms the fine metal powder, which form sub-spherical or irregular particles under the combined action of surface tension and rapid cooling of gas during falling down.


2. Equipment Features

  • Can produce most of the metal and alloy powders at low cost.

  • The metal powder is sub-spherical or irregular;

  • The metal melt solidifies quickly without segregation;

  • The particle size distribution of the powder can be controlled through appropriate process adjustment.


3. Configuration selection

  • Medium Frequency power supply: IGBT;KGPS

  • HMI: Analog screen; computer touch screen

  • Control method: Industrial computer, PLC

  • Other components:  High-quality Chinese brand; Foreign brand

  • it can also be adjusted according to different technical requirements to do customized design


INQUIRY

May Kalabutan nga mga produkto


Location
ACME Xingsha Industrial Park, East Liangtang Rd. , Changsha City, Hunan
Phone
+ 86-151 7315 3690( Jessie Mobile)
E-Mail
overseas@sinoacme.cn
Company

Gitukod kaniadtong 1999, ang ACME (Advanced Corporation for Materials & Equipments) nahimutang sa Xingsha Industrial Park, nga adunay gilapdon nga 100,000 m2. Ang ACME usa ka high-tech nga negosyo nga espesyalista sa paghimo sa mga kagamitan sa pagpainit sa industriya alang sa bag-ong materyal ug kusog.
palisiya sa personal nga | Termino ug mga Kondisyon

Contact kanato