klasifikacija
- Oprema za vakuumsku toplinsku obradu
- Metalurgija praha Industrijska oprema za grijanje
- C&SiC Composites Industrijska oprema za grijanje
- Oprema za proizvodnju praha za atomizaciju
- Novi materijal
- Oprema za termičku pirolizu organskog čvrstog otpada
- Ugljični materijal visoke čistoće i obložena grafitna komponenta
Kontakt
+86-151 7315 3690( Jessie Mobile)
ACME Xingsha Industrial Park, East Liangtang Rd. , grad Changsha, Hunan
Visoko vakuumska peć za lemljenje aluminijuma
High vacuum aluminum brazing furnace is applied for vacuum brazing of materials like heat exchanger, air condition evaporator, condenser, radar grid antenna, wave-guide tube, etc.
- Tehničke karakteristike
- Povezana opciona konfiguracija
Opis
High vacuum aluminum peć za lemljenje is applied for vacuum brazing of materials like heat exchanger, air condition evaporator, condenser, radar grid antenna, wave-guide tube, etc
Specification of High Vacuum Aluminum Brazing Furnace
Parametar / model | VAB-335S | VAB-446S | VAB-557S | VAB-669S |
Effective hot zone size W×H×L (mm) | 300 × 300 × 500 | 400 × 400 × 600 | 500 × 500 × 700 | 600 × 600 × 900 |
Nosivost (kg) | 200 | 200 | 300 | 400 |
Heating Power (kW) | 45 | 45 | 75 | 90 |
Max. temperature (°C) | 700 | 700 | 700 | 700 |
Ujednačenost temperature (°C) | ± 3 | ± 3 | ± 3 | ± 3 |
Vacuum degree (Pa) | 8×10⁻⁴ | 8×10⁻⁴ | 8×10⁻⁴ | 8×10⁻⁴ |
Pressure Increasing Rate (Pa/h) | ≤0.26 | ≤0.26 | ≤0.26 | ≤0.26 |
≤0.65 | ≤0.65 | ≤0.65 | ≤0.65 |
Parametar / model | VAB-7711S | VAB-8812S | VAB-9915S | VAB-121230S |
Effective hot zone size W×H×L (mm) | 700 × 700 × 1100 | 800 × 800 × 1200 | 900 × 900 × 1500 | 1200 × 1200 × 3000 |
Nosivost (kg) | 800 | 1000 | 1200 | 3000 |
Heating Power (kW) | 180 | 210 | 300 | 660 |
Max. temperature (°C) | 700 | 700 | 700 | 700 |
Ujednačenost temperature (° C) | ± 3 | ± 3 | ± 3 | ± 3 |
Vacuum degree (Pa) | 8×10⁻⁴ | 8×10⁻⁴ | 8×10⁻⁴ | 8×10⁻⁴ |
Pressure Increasing Rate (Pa/h) | ≤0.26 | ≤0.26 | ≤0.26 | ≤0.26 |
≤0.65 | ≤0.65 | ≤0.65 | ≤0.65 |
Tehničke karakteristike
1.The aluminum brazing tube furnace structure is horizontal, single chamber and loading horizontally.
2.The furnace hearth consists of several zones, wide nickle-chromium alloy heater and multiple layer stainless steel heat insulation, which has a good temperature uniformity.
3.The vacuum system inlet is configured with gas condensate steering device and filter collection device, preventing welding vapor polluting the vacuum pump.
4.Unique rear insulation technology assures larger radiation area and better insulation performance.
Optional Configuration of High Vacuum Aluminum Brazing Furnace
1.Furnace door type: on-line/off-line, vertically up and down, rotating
2.Vacuum pump and gauge: Foreign brand/high-quality Chinese brand
3.PLC: OMRON/Siemens/Mitsubishi
4.Temperature controller: SHIMADEN/EUROTHERM/Honeywell
5.Thermocouple: S type, K type, K type
6.Recorder: Paperless recorder/paper recorder
7.HMI: Simulation screen/Touch screen with industry computer
8.Electric component: high-quality Chinese brand/Schneider/Siemens