MENI

Početna>Proizvodi>C&SiC Composites Industrijska oprema za grijanje

Kontakt

+86-151 7315 3690( Jessie Mobile)

overseas@sinoacme.cn

ACME Xingsha Industrial Park, East Liangtang Rd. , grad Changsha, Hunan

Vacuum Debinding and Sintering Furnace(SiC/Si3N4/AlN)

Vacuum Debinding and Sintering Furnace(SiC/Si3N4/AlN)

The furnace is used forreaction sintering, low pressure sintering, re-crystal sintering of carbide, nitride, oxide ceramic embryo and products. The degreasing system is optional to realize the one-time degreasing and sintering treatment of ceramic products.

UPIT
  • Tehničke karakteristike
  • Povezana opciona konfiguracija

Opis
The furnace is used for  reaction sintering, low pressure sintering, re-crystal sintering of carbide, nitride, oxide ceramic embryo and products. The degreasing system is optional to realize the one-time degreasing and sintering treatment of ceramic products.

Application: Ceramic products such as SiC, silicon nitride and aluminum nitride.

Specifications of Vacuum Debinding and Sintering Furnace

ModelSpec

Working Zone Size

(W×H×L) (mm)

Max. Temperature (°C)Temperature Uniformity (°C)Ultimativni vakuum (Pa)Brzina povećanja pritiska (Pa/h)
VDSF-050511500 × 500 × 11001500 / 2400±5/± 101-1000.67
VDSF-1006121000 × 600 × 12001500 / 2400±5/± 101-1000.67
VDSF-1008131000 × 800 × 13001500 / 2400±5/± 101-1000.67
VDSF-1008251000 × 800 × 25001500 / 2400±5/± 101-1000.67
VDSF-1008401000 × 800 × 40001500 / 2400±5/± 101-1000.67
The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements.


Tehničke karakteristike

1.Using unique ACME super high temperature and high current power supply technology, it can long term stable use at high temperature;

2.Using special designed high temperature pyro-meter measuring technology with precision temperature control and small deviation;

3.Installed with special sealing muffle to minimize the silicon vapor and exhaust gas contamination to the heating element and insulation;

4.Installed high efficiency exhaust gas treatment device , which is environment-friendly and convenient to clean;

5.It has debinding system, to complete debinding and sintering process in one furnace at one time.

Optional Configuration of Vacuum Sintering Furnace

1.Furnace door: screw/hydraulic/manual elevation; manual tight/auto lock-ring tight

2.Furnace vessel: all carbon steel/inner layer stainless steel/all stainless steel

3.Furnace hot zone: soft carbon felt/soft graphite felt/rigid composite board/CFC

4.Heating element and muffle: isostatic press graphite/high purity, strength and density graphite/fine size graphite

5.Process gas system: volume/mass flow-meter; manual/auto valve;

6.Thermocouple: C type/S type/R type/B type

7.Pyro-meter:Dual-color/Single color; CHINO/Raytek


UPIT

Srodni proizvodi


lokacija
ACME Xingsha Industrial Park, East Liangtang Rd. , grad Changsha, Hunan
Telefon
+ 86-151 7315 3690(Jessie Mobile)
E-Mail
overseas@sinoacme.cn
O nama

Osnovana 1999. godine, ACME (Advanced Corporation for Materials & Equipments) nalazi se u industrijskom parku Xingsha, na površini od 100,000 m2. ACME je visokotehnološko preduzeće specijalizovano za proizvodnju industrijske opreme za grejanje za nove materijale i energiju. Politika privatnosti | Pravila i uvjeti

Kontaktiraj nas