klasifikacija
- Oprema za vakuumsku toplinsku obradu
- Metalurgija praha Industrijska oprema za grijanje
- C&SiC Composites Industrijska oprema za grijanje
- Oprema za proizvodnju praha za atomizaciju
- Novi materijal
- Oprema za termičku pirolizu organskog čvrstog otpada
- Ugljični materijal visoke čistoće i obložena grafitna komponenta
Kontakt
+86-151 7315 3690( Jessie Mobile)
ACME Xingsha Industrial Park, East Liangtang Rd. , grad Changsha, Hunan
Plinska peć za sinteriranje
It is used for vacuum sintering and pressure sintering of ceramic products. It has both horizontal and vertical structures. Debinding is an option function.
- Tehničke karakteristike
- Povezana opciona konfiguracija
Opis
It is used for vacuum sintering and pressure sintering of ceramic products. It has both horizontal and vertical structures. Debinding is an option function.
Primjena:Ceramic part such as SiC, Si3N4, B4C, AlN and etc.
Specifications of Vacuum Sintering Furnace
ModelSpec | Veličina radne zone (Š×V×D) (mm) | Max. temperatura (°C) | Ujednačenost temperature (°C) | Ultimativni vakuum (Pa) | Max. Pressure (MPa) |
HPSF-4412 | 400 × 400 × 1200 | 1500-2000 | ±5/± 10 | 1-100 | 10 |
HPSF-5512 | 500 × 500 × 1200 | 1500-2000 | ±5/± 10 | 1-100 | 10 |
HPSF-5518 | 500 × 500 × 1800 | 1500-2000 | ±5/± 10 | 1-100 | 10 |
VPSF-0203 | φ200 × 300 | 1500-2000 | ±5/± 10 | 1-100 | 10 |
VPSF-0308 | φ300 × 800 | 1500-2000 | ±5/± 10 | 1-100 | 10 |
VPSF-0612 | φ600 × 1200 | 1500-2000 | ±5/± 10 | 1-100 | 10 |
VPSF-0716 | φ700 × 1600 | 1500-2000 | ±5/± 10 | 1-100 | 10 |
VPSF-0815 | φ800 × 1500 | 1500-2000 | ±5/± 10 | 1-100 | 10 |
VPSF-0917 | φ900 × 1700 | 1500-2000 | ±5/± 10 | 1-100 | 10 |
Gore navedeni parametri se mogu prilagoditi zahtjevima procesa, oni nisu kao standard prihvatanja, detaljna specifikacija. će biti navedeno u tehničkom prijedlogu i sporazumima. |
Tehničke karakteristike
1.The furnace uses special hot zone structure and heating element design, good temperature uniformity;
2.Using special designed debinding muffle which has good sealing, complete binder removing and no contamination to inside components features;
3.It has functions of vacuum sintering, pressure sintering, negative pressure debinding and etc;
4.It has over temperature and over pressure mal-function alarm, mechanical automatic pressure protection and interlocking, high safety protection;
5.It configured with debinding system to achieve debinding and sintering of ceramic products.
Optional Configuration of Gas Pressure Sinter Furnace
1.Furnace door: screw/hydraulic/manual elevation; manual tight/ auto lock-ring tight
2. Posuda za peć: sav ugljični čelik/unutarnji sloj od nehrđajućeg čelika/sve od nehrđajućeg čelika
3.Furnace hot zone: soft carbon felt/soft graphite felt/hard composite felt/CFC
4.Grijaći element i prigušivač: grafit izostatičke preše / grafit visoke čistoće, čvrstoće i gustine / grafit fine veličine
5.Process gas system: volume/mass flow-meter
6.Thermocouple: K type/N type/C type/S type