Vakuumla Bağlama və Sinterləmə Ocağı

Vakuum ayırma və sinter sobası əsasən volfram ərintisi, ağır ərinti, moly ərintisi, titan ərintisi və sementlənmiş karbid materiallarının ayrılması və sinterlənməsi üçün uygundur. Vakuum ayırma sobası PEG, parafin və rezin bağlayıcının çıxarılması üçün istifadə olunur. O, həmçinin vakuum sinter, qismən təzyiq sinter və kiçik təzyiq sinter prosesləri edə bilər.

INQUIRY

Texniki Features
Əlaqədar isteğe bağlı konfiqurasiya

təsvir
Vacuum debinding and sinter furnace is mainly suitable for debinding and sinter process of tungsten alloy, heavy alloy, moly alloy, titanium alloy and cemented carbide materials. The vacuum debinding sitering furnace is used for PEG, paraffin and rubber binder removing. It can also do vacuum sinter, partial pressure sinter and minor pressure sinter processes.

Specifications of Vacuum Debinding and Sinter Furnace

SpecModel	VDSF-030306	VDSF-040408	VDSF-040415	VDSF-050520
Working Zone Size W×H×L (mm)	300 × 300 × 600	400 × 400 × 800	400 × 400 × 1500	500 × 500 × 2000
Max.Weight(kg) (not mean actual load weight)	100	200	400	900
Max.temperature (°C)	1550	1550	1550	1550
Temperatur vahidliyi (°C)	± 4	± 4	± 5	± 5
İstilik Gücü (kVt)	75	90	120	220
Son Vakuum (Pa)	1	1	1	1
Təzyiq artım sürəti (Pa/h)	≤ 0.67	≤ 0.67	≤ 0.67	≤ 0.67
Debinding gas	Ar/N₂/H2	Ar/N₂/H₂	Ar/N₂/H₂	Ar/N₂/H₂
Yuxarıda göstərilən parametrlər prosesin tələblərinə uyğunlaşdırıla bilər, onlar qəbul standartı, detal spesifikasiyası kimi deyil. texniki təklif və müqavilələrdə qeyd olunacaq.

Texniki Features
1. Special designed debinding muffle is adopted with good sealing and complete bind removable, preventing inside components pollution.
2. It has functions of slow vacuum, vacuum pre-sinter, minor negative pressure debinding, TOWAC debinding and minor positive pressure debinding.
3. The furnace adopts advanced refractory structure and materials, which features good insulation performance and less heat absorption. It can save more than 20% energy compare o previous design.
4. Vacuum debinding and sinter furnace works by using touch screen operation and PLC central control, which makes the operation simple and reliable.
5. The vacuum debinding sitering furnace uses special hot zone structure and heating element design, assuring good temperature uniformity.
6.The furnace has the functions of over temperature and over pressure fault alarm, mechanical automatic pressure protection and interlocking, which forms a highly safe furnace.
7. It has remote control operation, remote malfunction diagnosis and remote program update functions.

Optional Configuration of Vacuum Debinding and Sinter Furnace
1. Furnace door: hinge turning type, manual tight/auto lock-ring tight
2. Furnace vessel: All carbon steel/Inner layer stainless steel/Total stainless steel
3. Furnace hot zone: Soft carbon felt+Hard composite felt/all hard composite felt
4. Heater material: isostatic press graphite
5. 5.Muffle material: fine size graphite/ isostatic press graphite
6. Process gas control: Volume/mass flow-meter, manual value/auto value, Foreign brand/Chinese brand
7. Vacuum pump and gauge: Foreign brand/Chinese brand
8. Load truck: roller type/fork type
9. Operation panel: simulation screen/touch screen/industrial computer
10. PLC: OMRON/Siemens
11. Temperature controller: SHIMADEN/EUROTHERM
12. Thermocouple: C type(tungsten sheath/Moly sheath/ceramic sheath)
13. Recorder: Paperless recorder/paper recorder, Foreign brand/Chinese brand
14. Electric components: CHINT/Schneider/Siemens