تصنيف
للتواصل معنا
+ 86-151 7315 3690 (جيسي موبايل)
مجمع ACME Xingsha الصناعي، طريق East Liangtang. ، مدينة تشانغشا، هونان
فرن التخفيض من النوع الدافع
Pusher type furnace is mainly suitable for metal powder (like tungsten, moly, etc) reduction and powder metallurgy part sintering.
- الميزات التقنية
- التكوين الاختياري ذو الصلة
الوصف
Pusher type furnace is mainly suitable for metal powder (like tungsten, moly, etc) reduction and powder metallurgy part sintering
Specifications of Pusher Type فرن التخفيض
SpecModel | PTF-300/70-5-2 | PTF-300/70-4-4 | PTF-300/70-5-4 |
Muffle size W×H (mm) | 300 × 70 | 300 × 70 | 300 × 70 |
Muffle number | 2 | 4 | 4 |
منطقة التدفئة | 5 | 4 belt 8 zone | 5 belt 10 zone |
طول منطقة التسخين (مم) | 7300 | 6000 | 7500 |
درجة الحرارة القصوى (درجة مئوية) | 1150 | 1150 | 1150 |
Temperature uniformity (°C) | ± 5 | ± 5 | ± 5 |
طاقة التدفئة (كيلوواط) | 180 | 220 | 260 |
Process gas of pusher furnaces | ع / ن2/H2 | ع / ن2/H2 | ع / ن2/H2 |
Total size L×W×H(mm) | 13500 × 1900 × 1600 | 12000 × 2200 × 2000 | 13600 × 2200 × 2000 |
The above specifications are defined according to tungsten powder reduction process. These specifications can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements. |
الميزات التقنية
1. Multiple tube heating assures good temperature uniformity and large production capacity.
2. يضمن نوع التحميل والتفريغ المتقطع أداء الختم الجيد واستهلاك الغاز المنخفض.
3. Pusher furnaces are configured with full automatic boat charging, boat pushing, unloading and boat dumping service, which ensures stable quality and low labor force.
4. الفرن لديه وظائف التحكم عن بعد، تشخيص الأعطال عن بعد ووظائف تحديث البرنامج عن بعد.
Optional Configuration of Pusher Type Furnace
1. Refractory material: silicate aluminum fiber/alumina ceramic fiber/high alumina brick
2. Heater material: 0Cr21Al6Nb, 0Cr27Al7Mo2
3. Muffle material: SUS304/SUS310S/RA330/RA600/ZG45Cr28Ni48W5Si2
4. Pusher type: pneumatic/hydraulic/mechanical
5. Loading and unloading: automatic loading and unloading/manual loading and unloading with automatic boat push
6. PLC: OMRON / Siemens
7. تحكم في درجة الحرارة: SHIMADEN / EUROTHERM
8. Thermocouple: C type/S type/N type
9. المسجل: مسجل ورق / مسجل ورق ، ماركة أجنبية / ماركة صينية
10. لوحة التشغيل: شاشة محاكاة / شاشة تعمل باللمس / كمبيوتر صناعي
11. المكونات الكهربائية: CHINT / Schneider / Siemens